REAL

Mikro- és makromechanikai deformációs folyamatok vizsgálata töltőanyagot tartalmazó műanyagokban = Investigation of micro- and macromechanical deformation processes in particulate filled polymers

Móczó, János (2011) Mikro- és makromechanikai deformációs folyamatok vizsgálata töltőanyagot tartalmazó műanyagokban = Investigation of micro- and macromechanical deformation processes in particulate filled polymers. Project Report. OTKA.

[img]
Preview
PDF
68579_ZJ1.pdf

Download (119kB) | Preview

Abstract

Természetes szálakat tartalmazó PP kompozitokban vizsgáltuk a polimer mátrix jellemzőinek a hatását a kompozitban lejátszódó deformációs folyamatokra és megállapítottuk, hogy a határfelületek elválása a domináló mechanizmus amennyiben a komponensek közötti kölcsönhatás gyenge, ezzel szemben a mátrix nyírási folyása és/vagy a természetes szálak tördelődése játszódik le a erős adhézió esetén. Ezzel szemben kis szemcseméret esetén elsősorban a határfelületek elválása játszódik le erős és gyenge adhézió mellett is. Bizonyítottuk, hogy a töltőanyagok saját szilárdsága nagymértékben behatárolja azok erősítő hatását. PLA/lignocellulóz szálakból készített kompozitok vizsgálatával igazoltuk, hogy a kompozitok tönkremenetele során elsősorban a szálak tördelődése játszódik le. Ez pedig nagymértékben befolyásolja az erősítő hatást. A viszonylag erős adhézió eredményeként a kompozitok szilárdságának növelése a töltőanyagok saját szilárdságának növelésével érhető el PP/CaCO3 és PP/üveggyöngy kompozitokon végzett akusztikus emissziós és pásztázó elektronmikroszkópiás vizsgálatok segítségével kidolgoztunk egy eljárást, melynek segítségével a határfelületi kölcsönhatások erősségének becslése abban az esetben is elvégezhető, ha nem másodrendű kölcsönhatások eredményezik a komponensek közötti adhéziót. | Polypropylene composites were prepared from different PP matrices, and natural fibers to study the effect of matrix characteristics on deformation and failure. The results proved that the dominating deformations may change with matrix properties. Debonding is the dominating process when the adhesion of the components is poor, while matrix yielding and/or fiber fracture dominate when adhesion is improved by the introduction of a functionalized polymer. In the case of small fiber diameter debonding the dominating deformation process both for poor and good adhesion. The inherent strength of the reinforcement can be limiting factor in the improvement of composite strength. Results obtained on PLA/lignocellulosic fiber composites proved that during the failure of the composites fiber fracture occurs, and this determine the reinforcement of the composites. Because of the strong adhesion further improvement in composite strength is possible only through the increase of the inherent strength of wood particles. According to the results of acoustic emission measurements of PP/Glass beads and PP/CaCO3 composites an approach was proposed for the quantitative determination of adhesion strength in composites, in which adhesion is created by other mechanisms than secondary interactions. The results obtained showed that the use of functionalized polymer and other surface treatments in this composites resulted in adhesion strength one order of magnitude larger than without the coupling agent.

Item Type: Monograph (Project Report)
Uncontrolled Keywords: Makromolekuláris Kémia
Subjects: Q Science / természettudomány > QD Chemistry / kémia
Depositing User: Kotegelt Import
Date Deposited: 01 May 2014 06:03
Last Modified: 07 Jul 2014 09:29
URI: http://real.mtak.hu/id/eprint/12024

Actions (login required)

Edit Item Edit Item