Items where Author is "Balázsi, Csaba "

Article

Furko, Monika and Detsch, Rainer and Horváth, Zsolt Endre and Balázsi, Katalin and Boccaccini, Aldo R. and Balázsi, Csaba (2024) Amorphous, Carbonated Calcium Phosphate and Biopolymer-Composite-Coated Si3N4/MWCNTs as Potential Novel Implant Materials. NANOMATERIALS, 14 (3). No-279. ISSN 2079-4991

Kaou, Maroua Houria and Furko, Monika and Ben Zine, Haroune Rachid and Balázsi, Katalin and Balázsi, Csaba (2024) Morphological and structural evaluation of spark plasma sintered calcium silicate ceramics. INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, spec.i. ISSN 1546-542X

Kaou, Maroua Houria and Furko, Monika and Balázsi, Katalin and Balázsi, Csaba (2023) Advanced Bioactive Glasses: The Newest Achievements and Breakthroughs in the Area. NANOMATERIALS, 13 (16). ISSN 2079-4991

Furkó, Mónika and Detsch, Rainer and Tolnai, István and Balázsi, Katalin and Boccaccini, Aldo R. and Balázsi, Csaba (2023) Biomimetic mineralized amorphous carbonated calcium phosphate-polycaprolactone bioadhesive composites as potential coatings on implant materials. CERAMICS INTERNATIONAL, 49 (11). pp. 18565-18576. ISSN 0272-8842

Furkó, Mónika and Balázsi, Katalin and Balázsi, Csaba (2023) Calcium Phosphate Loaded Biopolymer Composites — A Comprehensive Review on the Most Recent Progress and Promising Trends. COATINGS, 13 (2). pp. 1-30. ISSN 2079-6412

Ben Zine, Haroune Rachid and Horváth, Zsolt Endre and Balázsi, Katalin and Balázsi, Csaba (2023) Novel Alumina Dispersion-Strengthened 316L Steel Produced by Attrition Milling and Spark Plasma Sintering. COATINGS, 13 (2). pp. 1-15. ISSN 2079-6412

Balázsi, Katalin and Balázsi, Csaba (2022) Application of sputtered ceramic TiC/a: C thin films with different structures by changing the deposition parameters. INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 19 (2). pp. 753-761. ISSN 1546-542X

Furkó, Mónika and Horváth, Zsolt E. and Czömpöly, Ottó and Balázsi, Katalin and Balázsi, Csaba (2022) Biominerals Added Bioresorbable Calcium Phosphate Loaded Biopolymer Composites. INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES, 23 (24). pp. 1-17. ISSN 1422-0067

Kaou, Maroua H. and Horváth, Zsolt Endre and Balázsi, Katalin and Balázsi, Csaba (2022) Eco‐friendly preparation and structural characterization of calcium silicates derived from eggshell and silica gel. INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, in pre. ISSN 1546-542X

Balázsi, Katalin and Varanasi, D. and Horváth, Zsolt Endre and Furko, Monika and Cinar, F. S. and Balázsi, Csaba (2022) Effect of the pressureless post-sintering on the hot isostatic pressed Al2O3 prepared from the oxidized AlN powder. SCIENTIFIC REPORTS, 12 (1). No.-8250. ISSN 2045-2322

Schlüter, Bernadette and Schröder, Christian and Zhang, Wenli and Mülhaupt, Rolf and Degenhardt, Ulrich and Balázsi, Katalin and Balázsi, Csaba (2022) Influence of Graphene Type and Content on Friction and Wear of Silicon Carbide/Graphene Nanocomposites in Aqueous Environment. MATERIALS, 15 (21). pp. 1-18. ISSN 1996-1944

Hegedüs, Nikolett and Lovics, Riku and Serényi, Miklós and Zolnai, Zsolt and Petrik, Péter and Balázsi, Csaba and Balázsi, Katalin (2022) Interpretation of hydrogen incorporation into radio frequency sputtered amorphous silicon based on Berg modelling. VACUUM, 202. No.-111164. ISSN 0042-207X

Hegedüs, Nikolett and Balázsi, Csaba and Kolonits, Tamás and Olasz, Dániel and Sáfrán, György and Serényi, Miklós and Balázsi, Katalin (2022) Investigation of the RF Sputtering Process and the Properties of Deposited Silicon Oxynitride Layers Under Varying Reactive Gas Conditions. MATERIALS, 15 (18). pp. 1-14. ISSN 1996-1944

Furkó, Mónika and Horváth, Zsolt Endre and Mihály, Judith and Balázsi, Katalin and Balázsi, Csaba (2021) Comparison of the Morphological and Structural Characteristic of Bioresorbable and Biocompatible Hydroxyapatite-Loaded Biopolymer Composites. NANOMATERIALS, 11 (12). ISSN 2079-4991

Hegedüs, Nikolett and Lovics, Riku and Serényi, Miklós and Zolnai, Zsolt and Petrik, Péter and Mihály, Judit and Fogarassy, Zsolt and Balázsi, Csaba and Balázsi, Katalin (2021) Examination of the Hydrogen Incorporation into Radio Frequency-Sputtered Hydrogenated SiNx Thin Films. COATINGS, 11 (1). pp. 1-13. ISSN 2079-6412

Balázsi, Csaba and Furko, Monika and Balázsi, Katalin (2021) Korszerű nitrid kerámiák előállítása és vizsgálata. XXIX. Nemzetközi Gépészeti Konferencia – OGÉT 2021, 29. pp. 93-96. ISSN 2668-9685

Hegedüs, Nikolett and Furkó, Mónika and Balázsi, Katalin and Balázsi, Csaba (2021) Környezetbarát energiatermelés, energiahatékonyság és közlekedés szempontjából kritikus üvegek, kerámiák és fémek. ANYAGOK VILÁGA, XVI (1). pp. 62-80. ISSN 1586-0140

Liao, Zhongquan and Standke, Yvonne and Gluch, Jürgen and Balázsi, Katalin and Pathak, Onkar and Balázsi, Csaba (2021) Microstructure and Fracture Mechanism Investigation of Porous Silicon Nitride–Zirconia–Graphene Composite Using Multi-Scale and In-Situ Microscopy. NANOMATERIALS, 11 (2). pp. 1-13. ISSN 2079-4991

Furko, Monika and Horváth, Zsolt Endre and Sulyok, Attila and Kovácsné Kis, Viktória and Balázsi, Katalin and Mihály, Judith and Balázsi, Csaba (2021) Preparation and morphological investigation on bioactive ion-modified carbonated hydroxyapatite-biopolymer composite ceramics as coatings for orthopaedic implants. CERAMICS INTERNATIONAL. ISSN 0272-8842 (In Press)

Varanasi, Dheeraj and Furko, Monika and Balázsi, Katalin and Balázsi, Csaba (2021) Processing of Al2O3-AlN Ceramics and Their Structural, Mechanical, and Tribological Characterization. MATERIALS, 14 (20). pp. 1-15. ISSN 1996-1944

Hegedüs, Nikolett and Balázsi, Katalin and Balázsi, Csaba (2021) Silicon Nitride and Hydrogenated Silicon Nitride Thin Films: A Review of Fabrication Methods and Applications. MATERIALS, 14 (19). pp. 1-21. ISSN 1996-1944

Furko, Monika and Balázsi, Csaba (2020) Calcium Phosphate Based Bioactive Ceramic Layers on Implant Materials Preparation, Properties, and Biological Performance. COATINGS, 10 (9). ISSN 2079-6412

Balázsi, Katalin and Furkó, Mónika and Klimczyk, Piotr and Balázsi, Csaba (2020) Influence of Graphene and Graphene Oxide on Properties of Spark Plasma Sintered Si3N4 Ceramic Matrix. Ceramics, 3 (1). pp. 40-50. ISSN 2571-6131

Furko, Monika and Balázsi, Csaba (2020) Morphological, Chemical, and Biological Investigation of Ionic Substituted, Pulse Current Deposited Calcium Phosphate Coatings. Materials, 13 (20). ISSN 1996-1944

Awais, Qadir and Balázsi, Katalin and Balázsi, Csaba and Ivor, Michal and Dusza, Jan (2020) Properties of MWCNTs added Si3N4 composites processed from oxidized silicon nitride powders. PROCESSING AND APPLICATION OF CERAMICS, 14 (1). pp. 25-31. ISSN 1820-6131 (print); 2406-1034 (online)

Balázsi, Csaba and Balázsi, Katalin (2020) A sokoldalú grafén : Kerámiaipari trendek. GYÁRTÁSTREND, 13 (7-8). pp. 18-20. ISSN 1789-8935

Ben Zine, Haroune Rachid and Balázsi, Katalin and Balázsi, Csaba (2019) The Effect of the Chemical Composition to the End-Properties of Ceramic Dispersed Strengthened 316L/Y2O3 Composites. PERIODICA POLYTECHNICA-CHEMICAL ENGINEERING. pp. 1-8. ISSN 0324-5853

Zagyva, Tamás and Balázsi, Katalin and Balázsi, Csaba (2019) Examination of novel electrosprayed biogenic hydroxyapatite coatings on Si3N4 and Si3N4/MWCNT ceramic composite. PROCESSING AND APPLICATION OF CERAMICS, 13 (2). pp. 132-138. ISSN 1820-6131

Balázsi, Csaba and Ben Zine, Haroune Rachid and Furkó, Mónika and Czigány, Zsolt and Almásy, László and Balázsi, Katalin and Horváth, Ákos (2019) Microstructural and magnetic characteristics of ceramic dispersion strengthened sintered stainless steels after thermal ageing. FUSION ENGINEERING AND DESIGN, 145. pp. 46-53. ISSN 0920-3796

Balázsi, Csaba and Furkó, Mónika and Szira, Fruzsina and Balázsi, Katalin (2019) Műszaki kerámiák kutatása és ipari alkalmazásaik: átlátszó AlON kerámiaanyagok előállítási módszerei és tulajdonságai. ACTA MATERIALIA TRANSYLVANICA (HU), 2 (1). pp. 7-12. ISSN 2601-1883

Ben Zine, Haroune Rachid and Filiz, Cinar Sahin and Czigány, Zsolt and Balázsi, Katalin and Balázsi, Csaba (2019) Novel SiC dispersion strengthened austenitic steels prepared by powder technology. ARCHIVES OF METALLURGY AND MATERIALS, 64 (4). pp. 1519-1526. ISSN 1733-3490

Balázsi, Csaba and Furko, Monika and Szira, Fruzsina and Balázsi, Katalin (2019) Research on Technical Ceramics and their Industrial Application: Preparation Techniques and Properties of Transparent AlON Ceramics. ACTA MATERIALIA TRANSYLVANICA (EN), 2 (1). pp. 7-12. ISSN 2601-8799

Lamnini, Soukaina and Balázsi, Csaba and Balázsi, Katalin (2019) Wear mechanism of spark plasma sintered MWCNTs reinforced zirconia composites under dry sliding conditions. WEAR. pp. 1-31. ISSN 0043-1648

Furko, Monika and Fogarassy, Zsolt and Balázsi, Katalin and Balázsi, Csaba (2019) An economic and facile method for graphene oxide preparation from graphite powder. RESOLUTION AND DISCOVERY. ISSN 2498-8707

Furko, Monika and Bella, Elena Della and Fini, Milena and Balázsi, Csaba (2018) Corrosion and biocompatibility examination of multi-element modified calcium phosphate bioceramic layers. MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS. ISSN 0928-4931 (In Press)

Ben Zine, H. Rachid and Balázsi, Katalin and Balázsi, Csaba (2018) EFFECT OF THE alfa-Si3N4 ADDITION ON THE TRIBOLOGICAL PROPERTIES OF 316L STAINLESS STEEL PREPARED BY ATTRITION MILLING AND SPARK PLASMA SINTERING. ANYAGOK VILÁGA, 15 (1). pp. 9-16. ISSN 1586-0140

Qadir, Awais and Fogarassy, Zsolt and Horváth, Zsolt Endre and Balázsi, Katalin and Balázsi, Csaba (2018) Effect of the oxidization of Si3N4 powder on the microstructural and mechanical properties of hot isostatic pressed silicon nitride. CERAMICS INTERNATIONAL. ISSN 0272-8842

Balázsi, Katalin and Furko, Mónika and Fogarassy, Zsolt and Balázsi, Csaba (2018) Examination of milled h-BN addition on sintered Si3N4/h-BN ceramic composites. PROCESSING AND APPLICATION OF CERAMICS, 12 (4). pp. 357-365. ISSN 1820-6131

Lamnini, Soukaina and Károly, Zoltán and Bódis, Eszter and Balázsi, Katalin and Balázsi, Csaba (2018) Influence of structure on the hardness and the toughening mechanism of the sintered 8YSZ/MWCNTs composites. CERAMICS INTERNATIONAL. ISSN 0272-8842

Ben Zine, H. Rachid and Balázsi, Csaba and Balázsi, Katalin (2018) Study of different ceramic additions effect on the 316L morphological properties during attrition milling. ANYAGOK VILÁGA, 15 (1). pp. 36-42. ISSN 1586-0140

Kovalčíková, Alexandra and Húlan, Michal and Sedlák, Richard and Fides, Martin and Balázsi, Csaba (2018) Thermal Shock Resistance of Si3N4/hBN Ceramic Composites. KEY ENGINEERING MATERIALS, 784. pp. 73-78. ISSN 1013-9826

Jenei, Péter and Balázsi, Csaba and Horváth, Ákos and Balázsi, Katalin and Gubicza, Jenő (2018) The influence of BN additives on the phase composition, microstructure and mechanical properties of 316L steel consolidated by spark plasma sintering. IOP Conference Series: Materials Science and Engineering, 426. ISSN 1757-8981

Jenei, Péter and Balázsi, Csaba and Horváth, Ákos and Balázsi, Katalin and Gubicza, Jenő (2018) The influence of carbon nanotube addition on the phase composition, microstructure and mechanical properties of 316L stainless steel consolidated by spark plasma sintering. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY, 7. pp. 1-9. ISSN 2238-7854

Lamnini, Soukaina and Fogarassy, Zsolt and Horváth, Zsolt Endre and Tóth, Sára and Balázsi, Katalin and Balázsi, Csaba (2018) The role of the attrition milling on the grain size and distribution of the carbon nanotubes in YSZ powders. BOLETIN DE LA SOCIEDAD ESPANOLA DE CERAMICA Y VIDRIO, in pre. ISSN 0366-3175

Furkó, Mónika and Balázsi, Katalin and Balázsi, Csaba (2017) Amerikai és európai perspektívák a kerámiák és üvegek ipari alkalmazásaira. ANYAGOK VILÁGA, 14 (1). pp. 1-21. ISSN 1586-0140

Furkó, Mónika and Balázsi, Katalin and Balázsi, Csaba (2017) COMPARATIVE STUDY ON PREPARATION AND CHARACTERIZATION OF BIOACTIVE COATINGS FOR BIOMEDICAL APPLICATIONS-A REVIEW ON RECENT PATENTS AND LITERATURE. Reviews on Advanced Materials Science, 48 (1). pp. 25-51. ISSN 1606-5131

Furko, Monika and Havasi, Viktor and Kónya, Zoltán and Grünewald, Alina and Detsch, Rainer and Balázsi, Csaba (2017) Development and characterization of multi-element doped hydroxyapatite bioceramic coatings on metallic implants for orthopedic applications. BOLETIN DE LA SOCIEDAD ESPANOLA DE CERAMICA Y VIDRIO. ISSN 0366-3175 (In Press)

Zine, Haroune Rachid Ben and Sahin, Filiz Cinar and Horváth, Zsolt Endre and Czigány, Zsolt and Horváth, Ákos and Balázsi, Katalin and Balázsi, Csaba (2017) Effect of Si3N4 addition on the morphological and structural properties of the 316L stainless steel for nuclear applications. RESOLUTION AND DISCOVERY. pp. 55-62. ISSN 2498-8707

Furko, Monika and Fazekas, Éva and Fábián, Enikő Réka and Balázsi, Csaba (2017) Electrochemical and Morphological Characterization of Silver Doped Bioceramic Layer on Metallic Implant Materials for Orthophedic Application. MATERIALS SCIENCE FORUM, 885. pp. 7-12. ISSN 0255-5476

Tapasztó, Orsolya and Balko, Ján and Puchy, Victor and Kun, Péter and Dobrik, Gergely and Fogarassy, Zsolt and Horváth, Zsolt Endre and Balázsi, Katalin and Balázsi, Csaba and Tapasztó, Levente (2017) Highly wear-resistant and low-friction Si3N4 composites by addition of graphene nanoplatelets approaching the 2D limit. SCIENTIFIC REPORTS, 7 (1). pp. 1-8. ISSN 2045-2322

Furkó, Mónika and May, Zoltán and Havasi, Viktor and Kónya, Zoltán and Grünewald, Alina and Balázsi, Csaba (2017) Pulse electrodeposition and characterization of non-continuous, multi-element-doped hydroxyapatite bioceramic coatings. Journal of Solid State Electrochemistry. -1. ISSN 1432-8488 (print version), 1433-0768 (electronic version)

Ben Zine, H. Rachid and Horvath, A. and Balázsi, Katalin and Balázsi, Csaba (2017) SUBMICRON SIZED SINTERED ODS STEELS PREPARED BY HIGH EFFICIENT ATTRITION MILLING AND SPARK PLASMA SINTERING. COURRIER DU SAVOIR, 24. pp. 93-100. ISSN 1112-3338

Balázsi, Csaba and Fogarassy, Zsolt and Tapasztó, Orsolya and Kailer, Andreas and Schröder, Christian and Balázsi, Katalin (2017) Si3N4/graphene nanocomposites for tribological application in aqueous environments prepared by attritor milling and hot pressing. Journal of the European Ceramic Society. ISSN 0955-2219

Bódis, Eszter and Cora, Ildikó and Balázsi, Csaba and Németh, Péter and Károly, Zoltán and Klébert, Szilvia and Fazekas, Péter and Keszler, Anna Mária and Szépvölgyi, János (2017) Spark plasma sintering of graphene reinforced silicon carbide ceramics. CERAMICS INTERNATIONAL, 43. pp. 9005-9011. ISSN 0272-8842

Furkó, Mónika and Jiang, Yongxin and Wilkins, Terry and Balázsi, Csaba (2016) Development and characterization of silver and zinc doped bioceramic layer on metallic implant materials for orthopedic application. CERAMICS INTERNATIONAL, 42. pp. 4924-4931. ISSN 0272-8842

Furko, M. and Jiang, Y. and Willikns, T. A. and Balázsi, Csaba (2016) Electrochemical and morphological investigation of silver and zinc modified calcium phosphate bioceramic coatings on metallic implant materials. Materials Science and Engineering C, 62. pp. 249-259. ISSN 0928-4931

Tapasztó, Orsolya and Tapasztó, Levente and Lemmel, Hartmut and Puchy, Victor and Dusza, Jan and Balázsi, Csaba and Balázsi, Katalin (2016) High orientation degree of graphene nanoplatelets in silicon nitride composites prepared by spark plasma sintering. CERAMICS INTERNATIONAL, 42 (1). pp. 1002-1006. ISSN 0272-8842

Horváth, Ákos and Balázsi, Katalin and Balázsi, Csaba (2016) Nanoszerkezetű ODS acélfejlesztés Magyarországon. NUKLEON, 9. pp. 1-5. ISSN 1789-9613

Horváth, Péter and Li, Yunpeng and Csucs, Gabor and Piccinini, Filippo and Smith, Kevin and Balázsi, Csaba (2015) CIDRE: an illumination-correction method for optical microscopy. NATURE METHODS. ISSN 1548-7091

Furko, M. and Lakatos-Varsányi, M. and Balázsi, Csaba (2015) Comparative corrosion study on silver coated metallic implants. MATERIALS SCIENCE FORUM, 812. pp. 327-332. ISSN 0255-5476

Balázsi, Csaba (2015) Korszerű kerámiák kutatása és fejlesztése. Műszaki Tudományos Közlemények (3). pp. 25-30. ISSN 2393-1280

Bertóti, Imre and Mohai, Miklós and Balázsi, Csaba and László, Krisztina and Szépvölgyi, János (2015) Low pressure RF plasma modification of the surface of three different nano-carbon materials. OPEN CHEMISTRY, 13. pp. 451-456.

Oláh, Nikolett and Fogarassy, Zsolt and Furkó, Mónika and Balázsi, Csaba and Balázsi, Katalin (2015) Sputtered nanocrystalline ceramic TiC / amorphous C thin films as potential materials for medical applications. CERAMICS INTERNATIONAL, 41 (4). pp. 5863-5871. ISSN 0272-8842

Károly, Zoltán and Balázsi, Csaba and Balázsi, Katalin and Gergely, Gréta Katalin and Petrik, Attila and Lábár, János (2014) Alumínium mátrixú kompozitok előállítása szikrakisüléses szinterelési technikával. BÁNYÁSZATI KOHÁSZATI LAPOK-KOHÁSZAT, 147 (1). pp. 20-24. ISSN 0005-5670

Lee, Sang-Woon and Balázsi, Csaba and Balázsi, Katalin (2014) Comparative Study of Hydroxyapatite Prepared from Seashells and Eggshells as a Bone Graft Material. TISSUE ENGINEERING AND REGENERATIVE MEDICINE, 11 (2). pp. 1-8. ISSN 1738-2696

Károly, Zoltán and Balázsi, Csaba and Balázsi, Katalin and Petrik, Attila and Lábár, János (2014) HYBRID ALUMINUM MATRIX COMPOSITES PREPARED BY SPARK PLASMA SINTERING (SPS). EUROPEAN CHEMICAL BULLETIN, 3 (3). pp. 247-250. ISSN 2063-5346

Klébert, Szilvia and Balázsi, Csaba and Balázsi, Katalin and Bódis, Eszter and Fazekas, Péter and Keszler, Anna Mária and Szépvölgyi, János and Károly, Zoltán (2014) Spark plasma sintering of graphene reinforced hydroxyapatite composites. CERAMICS INTERNATIONAL, 41 (3). pp. 3647-3652. ISSN 0272-8842

Klébert, Szilvia and Balázsi, Csaba and Balázsi, Katalin and Bódis, Eszter and Fazekas, Péter and Keszler, Anna Mária and Szépvölgyi, János and Károly, Zoltán (2014) Spark plasma sintering of graphene reinforced hydroxyapatite composites. CERAMICS INTERNATIONAL. ISSN 0272-8842

Tapasztó, Orsolya and Hartmut, Lemmel and Markó, Márton and Balázsi, Katalin and Balázsi, Csaba and Tapasztó, Levente (2014) The influence of sintering on the dispersion of carbon nanotubes in ceramic matrix composites. CHEMICAL PHYSICS LETTERS, 614. pp. 148-150. ISSN 0009-2614

Balázsi, Katalin and Vandrovcová, Marta and Bačáková, Lucie and Balázsi, Csaba (2013) Structural and biocompatible characterization of TiC/a:C nanocomposite thin films. MATERIALS SCIENCE AND ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS, 33 (3). pp. 1671-1675. ISSN 0928-4931

Balázsi, Csaba and Gergely, Gréta and Balázsi, Katalin and CHAE, Chang-Hoon and SIM, Hye-Young and CHOI, Je-Yong and KIM, Seong-Gon (2013) Bone formation with nano-hydroxyapatite from eggshell. Materials Science Forum, 729. pp. 25-30. ISSN 0255-5476

Balázsi, Csaba and Lukács, István Endre and Balázsi, Katalin (2013) Chemical sensors based on nano-hexagonal tungsten oxide: Synthesis and characterization. NATO SCIENCE FOR PEACE AND SECURITY SERIES B : PHYSICS AND BIOPHYSICS, 2013. pp. 125-138. ISSN 1874-6500

Koncz, Péter and Horváth, Ákos and Balázsi, Katalin and Sahin, Filiz Cinar and Göller, Gültekin and Onüralp, Yücel and Balázsi, Csaba (2013) Correlation between milling parameters, structural and mechanical properties of nanostructured austenitic Y2O3 strengthened steels. Materials Science Forum, 729. pp. 409-414. ISSN 0255-5476

Károly, Zoltán and Bartha, Cecília and Mohai, Ilona and Balázsi, Csaba and Sajó, István E. and Szépvölgyi, János (2013) Deposition of Silicon Carbide and Nitride Based Coatings by Atmospheric Plasma Spraying. International Journal of Applied Ceramic Technology, 10 (1). pp. 72-78. ISSN 1546-542X

Kvetková, Lenka and Duszová, Annamária and Kašiarová, Monika and Dorčáková, Františka and Dusza, Ján and Balázsi, Csaba (2013) FRACTURE MECHANISM IN Si3N4 – GRAPHENE PLATELETS COMPOSITES. ACTA METALLURGICA SLOVACA - CONFERENCE, 3. pp. 213-218. ISSN 1338-1660

Kvetková, Lenka and Duszová, Annamária and Kašiarová, Monika and Dorčáková, Františka and Dusza, Ján and Balázsi, Csaba (2013) Influence of processing on fracture toughness of Si3N4 + graphene platelet composites. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 33 (12). pp. 2299-2304. ISSN 0955-2219

Balázsi, Katalin and Vandrovcová, Marta and Bačáková, Lucie and Balázsi, Csaba and Bertóti, Imre and Davin, François and Radnóczi, György (2013) Mechanical behavior of bioactive TiC nanocomposite thin films. Materials Science Forum, 729. pp. 296-301. ISSN 0255-5476

Tabi, T. and Balázsi, Csaba and Petrik, Attila and Kovács, József Gábor and Kovács, Norbert Krisztián and Rákos, Katalin (2013) Megújuló erőforrásból előállított lebontható polimerek alkalmazása a gyors prototípusgyártásban. Műanyag és Gumi, 50 (10). pp. 389-394. ISSN 0027-2914

Gergely, Gréta Katalin and Sahin, Filiz Cinar and Göller, Gültekin and Balázsi, Csaba (2013) Microstructural and mechanical investigation of hydroxyapatite–zirconia nanocomposites prepared by spark plasma sintering. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 33 (12). pp. 2313-2319. ISSN 0955-2219

Kun, Péter and Tapasztó, Orsolya and Czigány, Zsolt and Balázsi, Csaba (2013) Preparation and characterization of multilayer graphene by mechanical milling and related applications for ceramic composites. Materials Science Forum, 729. pp. 252-259. ISSN 0255-5476

Allazadeh, Mohammad Reza and Balázsi, Csaba (2013) Reinforced Aluminum Matrix Composite Application in Friction Material. RECENT PATENTS ON CORROSION SCIENCE, 3. online. ISSN 2210-6839

Balázsi, Csaba and Tapasztó, Orsolya and Károly, Zoltán and Kun, Péter and Balázsi, Katalin and Szépvölgyi, János (2013) Structural and mechanical properties of milled Si3N4/cnts composites by spark plasma sintering method. Materials Science Forum, 729. pp. 31-36. ISSN 0255-5476

Balázsi, Katalin and Lukács, István Endre and Gurbán, Sándor and Menyhárd, Miklós and Bacáková, L. and Vandrovcová, M. and Balázsi, Csaba (2013) Structural, mechanical and biological comparison of TiC and TiCN nanocomposites films. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 33 (12). pp. 2217-2221. ISSN 0955-2219

Hvizdoš, Pavol and Dusza, Ján and Balázsi, Csaba (2013) Tribological properties of Si3N4–graphene nanocomposites. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 33 (12). pp. 2359-2364. ISSN 0955-2219

Rónainé Pfeifer, Judit and Sáfrán, György and Wéber, Ferenc and Zsigmond, Valéria and Tapasztó, Orsolya and Arató, Péter and Balázsi, Csaba (2010) Tribology Study of Silicon Nitride-Based Nanocomposites with Carbon Additions. MATERIALS SCIENCE FORUM, 659. pp. 235-238. ISSN 0255-5476

Book Section

Balázsi, Katalin and Furko, Monika and Balázsi, Csaba (2021) Ceramic Matrix Graphene and Carbon Nanotube Composites. In: Module in Materials Science and Materials Engineering. Elsevier B.V., Amsterdam. ISBN 9780128035818

Balázsi, Csaba and Balázsi, Katalin and Furko, Monika and Zagyva, Tamás (2019) Korszerű műszaki kerámiák kutatása és ipari alkalmazásai: Si3N4/grafén nanokompozitok. In: XXVII. Nemzetközi Gépészeti Konferencia OGÉT 2019. Erdélyi Magyar Tudományos Társaság, Nagyvárad, pp. 27-30.

Allazadeh, Mohammad Reza and Balázsi, Csaba (2015) Application of Milling in Synthesizing Nanostructure Metal Matrix Composites Powder. In: Handbook of Mechanical Nanostructuring. Wiley‐VCH Verlag GmbH & Co. KGaA, Weinheim, pp. 449-470. ISBN 9783527335060 (print); 9783527674947 (online)

Balázsi, Katalin and Balázsi, Csaba (2015) Biogenic Hydroxyapatite Based Implant Materials. In: Green Biorenewable Biocomposites: From Knowledge to Industrial Applications. Apple Academic Press Ltd., Waretown, pp. 27-55. ISBN 9781771880329

Tapasztó, Orsolya and Tapasztó, Levente and Balázsi, Csaba and Puchy, Victor and Dusza, Jan and Horváth, Zsolt Endre and Balázsi, Katalin (2015) ORIENTATION OF GRAPHENE NANOPLATELETS IN SILICON NITRIDE NANOCOMPOSITES. In: 12th Multinational Congress on Microscopy. Akadémiai Kiadó, Budapest, pp. 539-540. ISBN 978-963-05-9653-4

Balázsi, Csaba and Tapasztó, Orsolya and Balázsi, Katalin (2015) STRUCTURAL INVESTIGATION OF BIOGENIC CALCIUM PHOSPHATE BASED COMPOSITES PREPARED BY ELECTROSPINNING. In: 12th Multinational Congress on Microscopy. Akadémiai Kiadó, Budapest, pp. 523-524. ISBN 978-963-05-9653-4

Monograph

Nguyen, Quoc Khanh and Balázsi, Csaba and Erdélyi, Róbert and Kurunczi, Sándor and Pongrácz, Anita and Sebestyén, Anett and Szabó, Zoltán and Volk, János and Vonderviszt, Ferenc (2013) Vezetőképesség moduláció ZnO nanoszálakon bioreceptorokkal = Conductivity Modulation of ZnO Nanowires by Bioreceptors (CoMoNano). Project Report. OTKA.

Arató, Péter and Balázsi, Csaba and Hegman, Norbert and Kövér, Zsuzsanna Ilona and Rónainé dr. Pfeifer, Judit (2011) Korszerű kerámiák újszerű szerkezettel = Advanced Ceramics with Novel Structure. Project Report. OTKA.

Gyulai, József and Arató, Péter and Balázsi, Csaba and Battistig, Gábor and Biró, László Péter and Hárs, György and Lábadi, Zoltán and Lohner, Tivadar and Makkai, Zsolt and Menyhárd, Miklós and Nguyen, Quoc Khanh and Pászti, Ferenc and Petrik, Péter and Ster, András and Tóth, Lajos and Vargáné dr. Josepovits, Katalin (2007) Ionsugaras módszerek a fizikai nanotechnológiában (IONNANO) = Ion beam modifications in near-to-physics nanotechnology. Project Report. OTKA.

Conference or Workshop Item

Balázsi, Katalin and Furkó, Mónika and Balázsi, Csaba (2020) Nitrid kerámiák környezetkímélő előállítása és vizsgálata. In: XXVIII. Nemzetközi Gépészeti Konferencia – OGÉT 2020, 2020.04.24, Online konferencia.

Balázsi, Katalin and Fogarassy, Zsolt and Schröder, Christian and Kailer, Andreas and Balázsi, Csaba (2017) Study of Si3N4/Graphene for Tribological Applications. In: INTERNATIONAL MATERIALS TECHNOLOGIES AND METALLURGY CONFERENCE 2017, 2017.10.26-2017.10.27, Istanbul.