Items where Author is "Lendvai, János"

Nguyen Q., Chinh and Olasz, Dániel and Ahmed, Anwar Q. and Sáfrán, György and Lendvai, János and Langdon, Terence G. (2023) Modification of the Hall-Petch Relationship for Submicron-Grained FCC Metals. MATERIALS SCIENCE AND ENGINEERING A : STRUCTURAL MATERIALS: PROPERTIES, MICROSTRUCTURE AND PROCESSING, 862. pp. 1-4. ISSN 0921-5093 (print); 1873-4936 (online)

Gubicza, Jenő and Lábár, János L. and Lendvai, János and Nguyen, Q. Chinh (2019) The influence of artificial aging on the microstructure and hardness of an Al–Zn–Mg–Zr alloy processed by equal-channel angular pressing. JOURNAL OF MATERIALS SCIENCE, 54 (15). pp. 10918-10928. ISSN 0022-2461 (print); 1573-4803 (online)

Kovács, Zsolt and Ezzeldien, Mohammed and Chinh, Nguyen Quang and Radnóczi, György and Lendvai, János (2017) Nanoindentation measurements on a torsionally deformed Zr44Ti11Cu10Ni10Be25 bulk metallic glass. JOURNAL OF ALLOYS AND COMPOUNDS, 708. pp. 301-307. ISSN 0925-8388

Ungár, Tamás and Balogh, Levente and Borbély, András and Gubicza, Jenő and Lendvai, János and Ribárik, Gábor and Szenes, György and Tichy, Géza (2013) Csúszási rendszerek, Burgers vektor és rétegződési hibák meghatározás köbös, ortorhombos és hexagonális rendszerekben a röntgen vonalprofil analízis módszere alapján = Active slip-systems, Burgers vectors and twinning in hexagonal, cubic and ortorhombic systems determined by X-ray line profile analysis. Project Report. OTKA.

Nguyen Quang, Chinh and Gubicza, Jenő and Czeppe, T. and Lendvai, János and Langdon, T. G. (2010) Processing Age-hardenable Alloys by Equal-Channel Angular Pressing at Room Temperature: Strategies and Advantages. MATERIALS SCIENCE FORUM, 633-63. pp. 527-534. ISSN 0255-5476

Nguyen Quang, Chinh and Gubicza, Jenő and Czeppe, T. and Lendvai, János and Xu, C. (2009) Developing a strategy for the processing of age-hardenable alloys by ECAP at room temperature. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCURE AND PROCESSING, 516. pp. 248-252. ISSN 0921-5093

Lendvai, János and Gubicza, Jenő and Lábár, János and Kuli, Z. (2009) Effect of crystallization on the deformation behavior of a Zr-based bulk metallic glass. INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 100. pp. 439-442. ISSN 1862-5282

Nguyen Quang, Chinh and Gubicza, Jenő and Czeppe, T. and Lendvai, János and Hegedűs, Zoltán (2008) Effect of Pre-Aging on the Microstructure and Strength of Supersaturated AlZnMg Alloys Processed by ECAP. MATERIALS SCIENCE FORUM, 584-58. pp. 501-506. ISSN 0255-5476

Gubicza, Jenő and Lábár, János and Agócs, Emil and Fátay, D. and Lendvai, János (2008) Effect of nano-quasicrystals on viscosity of a Zr-based bulk metallic glass. Scripta Materialia, 58 (4). pp. 291-294. ISSN 1359-6462

Lendvai, János and Fátay, D. and Gubicza, Jenő (2008) Indentation creep study on a Zr-based bulk metallic glass containing nano-quasicrystals. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCURE AND PROCESSING, 483-48. pp. 607-610. ISSN 0921-5093

Ungár, Tamás and Groma, István and Lendvai, János and NGUYEN, QUANG CHINH and Ribárik, Gábor and Szenes, György (2008) Mikroszerkezet karakterizációja röntgen vonalprofil analízis alapján = Characterization of microstructure by X-ray line profile analysis. Project Report. OTKA.

Lendvai, János and Groma, István and Krállics, György and Máthis, Krisztián and Révész, Ádám and Ribárik, Gábor and Shapaan, Mahmoud Shapaan and Szenes, György and Ungár, Tamás (2007) Gyorshűtéssel, mechanikus ötvözéssel, illetve nagy deformációval előállított nanokristályos anyagok mikroszerkezete, termikus és mechanikai tulajdonságai = Microstructure, thermal and mechanical properties of nanocrystalline materials produced by rapid solidification, mechanical alloying or by severe plastic deformation. Project Report. OTKA.

Fátay, D. and Gubicza, Jenő and Lendvai, János (2007) Indentation creep behavior of a Zr-based bulk metallic glass. Journal of Alloys and Compounds, 434-43. pp. 75-78. ISSN 0925-8388

Horváth, Győző and Chinh, Nguyen Quang and Gubicza, Jenő and Lendvai, János (2007) Plastic instabilities and dislocation densities during plastic deformation in Al–Mg alloys. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCURE AND PROCESSING, 445-44. pp. 186-192. ISSN 0921-5093

Baretzky, B. and Baró, M. D. and Grabovetskaya, G. P. and Gubicza, Jenő and Ivanov, M. B. and Kolobov, Yu. R. and Langdon, T. G. and Lendvai, János and Lipnitskii, A. G. and Mazilkin, A. A. and Nazarov, A. A. and Nogués, J. and Ovidko, I. A. and Protasova, S. G. and Raab, G. I. and Révész, Ádám and Skiba, N. V. and Sort, J. and Starink, M. J. and Straumal, B. B. and Surinach, S. and Ungár, Tamás and Zhilyaev, A. P. (2005) Fundamentals of interface phenomena in advanced bulk nanoscale materials. Reviews on Advanced Materials Science, 9 (1). pp. 45-108. ISSN 1606-5131

Fátay, D. and Gubicza, Jenő and Szommer, Péter and Lendvai, János and Bletry, M. and Guyot, P. (2004) Thermal stability and mechanical properties of a Zr-based bulk amorphous alloy. In: 13th International Conference on the Strength of Materials (ICSMA 13), 2003. augusztus, Budapest, Hungary.

Shapaan, Mahmoud and Gubicza, Jenő and Lendvai, János and Varga, Lajos Károly (2004) Crystallization behavior of (Fe100-xCox)(62)Nb8B30 bulk amorphous alloy. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCURE AND PROCESSING, 375-77. pp. 785-788. ISSN 0921-5093

Chinh, Nguyen Quang and Gubicza, Jenő and Kovács, Zsolt and Lendvai, János (2004) Depth-sensing indentation tests in studying plastic instabilities. Journal of Materials Research, 19 (1). pp. 31-45. ISSN 0884-2914 (print), 2044-5326 (online)

Gubicza, Jenő and Juhász, A. and Lendvai, János (1996) A new method for hardness determination from depth sensing indentation tests. Journal of Materials Research, 11 (12). pp. 2964-2967. ISSN 0884-2914 (print), 2044-5326 (online)