Influence of Flux and Related Factors on Intermetallic Layer Growth within SAC305 Solder Joints

Dušek, Karel and Vesely, Peter and Bušek, David and Petrác, Adam and Géczy, Attila and Illés, Balázs and Krammer, Olivér (2021) Influence of Flux and Related Factors on Intermetallic Layer Growth within SAC305 Solder Joints. MATERIALS, 14. ISSN 1996-1944

Preview

Text 2111.pdf Available under License Creative Commons Attribution. Download (1MB) | Preview

Abstract

Flux contained in solder paste significantly affects the process of solder joint creation during reflow soldering, including the creation of an intermetallic layer (IML). This work investigates the dependence of intermetallic layer thickness on ROL0 / ROL1 flux classification, glossy or matt solder mask, and OSP / HASL / ENIG soldering pad surface finish. Two original SAC305 solder pastes differing only in the used flux were chosen for the experiment. The influence of multiple reflows was also observed. The intermetallic layer thicknesses were obtained by the image analysis of micro-section images. The flux type proved to have a significant impact on the intermetallic layer thickness. The solder paste with ROL1 caused an increase in IML thickness by up to 40% in comparison to an identical paste with ROL0 flux. Furthermore, doubling the roughness of the solder mask has increased the resulting IML thickness by 37% at HASL surface finish and by an average of 22%.

Actions (login required)

Edit Item