Effectiveness and Characterization of Novel Mineral Clay in Cd2+ Adsorption Process: Linear and Non-Linear Isotherm Regression Analysis

Tonk, Szende and Aradi, László Előd and Kovács, Gábor and Turza, Alexandru and Rápó, Eszter (2022) Effectiveness and Characterization of Novel Mineral Clay in Cd2+ Adsorption Process: Linear and Non-Linear Isotherm Regression Analysis. WATER, 14 (3). p. 279. ISSN 2073-4441

Preview

Text water-14-00279-v2 (3).pdf Available under License Creative Commons Attribution. Download (5MB) | Preview

Abstract

The excellent adsorption properties of clay minerals make the optimization of heavy metal removal the subject of numerous research projects. In the present study, ASLAVITAL cosmetic clay (ACC) powder was applied for the removal of Cd2+ from water. The main deposit of ACC clay is the Pădurea Craiului Mountains in Romania. A wide range of morpho-structural approaches (SEM, EDX, FTIR, Raman, XRD) were used to characterize the morphology and elemental composition of the adsorbent. As expected for clay minerals, Al (Wt(%) = 11.4 ± 0.9) and Si (Wt(%) = 13.7 ± 1.4) are the main constituents of ACC. After adsorption, Wt(%) = 0.2 ± 0.01 Cd2+ was detected in the sample. As proved before, the initial metal concentration is the primary influencing factor; therefore, batch adsorption of 10–160 mg/L Cd2+ was investigated. After 190 min, an efficiency of 99% was reached, and the quantity in equilibrium increased from 1–8 mg/g. The best fit in linear form was obtained for the Langmuir II. model, where R2 = 0.954 (RL = 0.037–0.027). Based on linear isotherm models, physical bonds formed between ACC and Cd2+ during the favorable adsorption. For the non-linear fits, the Liu model proved to be the best R2 = 0.965, χ2 = 1.101. Pseudo-II-order kinetic model described the experimental data R2 = 0.988–0.999; qexp and qcalc were almost identical (the differences ranged 0.03–0.34).

Actions (login required)

Edit Item