Items where Author is "Tábi, T."

Article

Tábi, T. and Gere, D. and Csézi, G. and Pölöskei, K. (2024) Influence of Epoxidized Natural Rubber of the Thermoformability of Poly(Lactic Acid) Biopolymer Films Using Elevated Temperature Ball Burst Tests. JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY : AN INTERNATIONAL FORUM FOR THERMAL STUDIES, 149 (1). pp. 75-87. ISSN 1388-6150 (print); 1588-2926 (online)

Pölöskei, K. and Csézi, G. and Hajba, S. and Tábi, T. (2020) Investigation of the thermoformability of various D‐Lactide content poly(lactic acid) films by ball burst test. Polymer Engineering & Science, 60 (6). pp. 1266-1277. ISSN 0032-3888 (print); 1548-2634 (online)

Tábi, T. and Wacha, A. F. and Hajba, S. (2018) Effect of D-lactide content of annealed poly(lactic acid) on its thermal, mechanical, heat deflection temperature, and creep properties. Journal of Applied Polymer Science. pp. 2-27. ISSN 0021-8995

Tábi, T. and Hajba, S. (2018) Investigation of Long Cellulose Fibre Reinforced and Injection Moulded Poly(lactic acid) Biocomposites. ACTA TECHNICA JAURINENSIS, 11 (3). pp. 150-164. ISSN 1789-6932

Dzul-Cervantes, M. and Herrera-Franco, P. J. and Tábi, T. and Valadez-Gonzalez, A. (2017) Using Factorial Design Methodology to Assess PLA-g-Ma and Henequen Microfibrillated Cellulose Content on the Mechanical Properties of Poly(lactic acid) Composites. International Journal of Polymer Science, 2017. pp. 1-14. ISSN 1687-9422

Tábi, T. and Kovács, N. K. and Sajó, I. E. and Czigány, T. and Hajba, S. and Kovács, J. G. (2016) Comparison of thermal, mechanical and thermomechanical properties of poly(lactic acid) injection-molded into epoxy-based Rapid Prototyped (PolyJet) and conventional steel mold. Journal of Thermal Analysis and Calorimetry, 123 (1). pp. 349-361. ISSN 1388-6150 (Submitted)

Tábi, T. and Hajba, S. and Kovács, J.G. (2016) Effect of crystalline forms (α′ and α) of poly(lactic acid) on its mechanical, thermo-mechanical, heat deflection temperature and creep properties. EUROPEAN POLYMER JOURNAL, 82. pp. 232-243. ISSN 0014-3057

Tábi, T. and Kovács, N. K. and Sajó, I. E. and Czigány, T. and Hajba, S. and Kovács, J. G. (2015) Comparison of thermal, mechanical and thermomechanical properties of poly(lactic acid) injection-molded into epoxy-based Rapid Prototyped (PolyJet) and conventional steel mold. Journal of Thermal Analysis and Calorimetry. ISSN 1388-6150 (Submitted)

Tábi, T. and Suplicz, A. and Szabó, Ferenc and Kovács, Norbert Krisztián and Zink, Béla and Hargitai, Hajnalka and Kovács, József Gábor (2015) The analysis of injection molding defects caused by gate vestiges. Express Polymer Letters, 9 (4). pp. 394-400. ISSN 1788-618X

Zsíros, L. and Suplicz, A. and Romhány, G. and Tábi, T. and Kovacs, J. G. (2014) Development of a novel color inhomogeneity test method for injection molded parts. Polymer Testing, 37. pp. 112-116. ISSN 0142-9418, ESSN: 1873-234 (Submitted)