Post-metallization annealing and photolithography effects in p-type Ge/Al2O3/Al MOS structures

Ioannou-Sougleridis, V. and Alafakis, S. and Pécz, Béla and Velessiotis, D. and Vouroutzis, N. Z. (2022) Post-metallization annealing and photolithography effects in p-type Ge/Al2O3/Al MOS structures. ECS JOURNAL OF SOLID STATE SCIENCE AND TECHNOLOGY, 11 (4). ISSN 2162-8769

Text jss_11_4_045006.pdf Restricted to Repository staff only Download (2MB) | Request a copy

Abstract

In this work, the combined effect of negative tone photolithography and post-metallization annealing (PMA) on the electrical behavior of Al/Al2O3/p-Ge MOS structures are investigated. During photoresist development, the exposed upper part of the Al2O3 film weakens due to the reaction with the developer. Subsequent processes of Al deposition and PMA at 350 °C result in alumina thickness reduction. The gate electrode formation seems to involve at least three processes: (a) germanium substrate out-diffusion and accumulation at the top of the alumina layer that takes place during the alumina deposition, (b) alumina destabilization, and (c) germanium diffusion into the deposited Al metal and Al diffusion into the alumina. The overall effect is the reduction of the alumina thickness due to its partial consumption. It is shown that the germanium diffusion depends on the annealing duration, and not on the annealing ambient (inert or forming gas). Although PMA passivates interface traps near the valence band edge, the insulating properties of the stacks are degraded. This degradation appears as a low-level ac loss, attributed to a hopping current that flows through the Al2O3 layer. The results are discussed and compared to recently reported on Pt/Al2O3/p-Ge structures formed and treated under the same conditions.

Actions (login required)

Edit Item