Unifying Calibration Parameters for Dielectric Moisture Meter

Mészáros, Péter and Funk, David B. (2006) Unifying Calibration Parameters for Dielectric Moisture Meter. Progress in Agricultural Engineering Sciences, 2 (1). pp. 73-94. ISSN 1786-335X

Text progress.2.2006.1.4.pdf Restricted to Repository staff only until 31 December 2026. Download (813kB)

Abstract

The Unified Grain Moisture Algorithm is capable of improved accuracy and allows the combination of many grain types into a single “unified calibration”. The purposes of this research were to establish processes for determining unifying parameters from the chemical and physical properties of grains. The data used in this research were obtained as part of the United States Department of Agriculture-Grain Inspection, Packers and Stockyards Administration's Annual Moisture Calibration Study. More than 5,000 grain samples were tested with a Hewlett-Packard 4291A Material/Impedance Analyzer. Temperature tests were done with a Very High Frequency prototype system at Corvinus University of Budapest. Typical chemical and physical parameters for each of the major grain types were obtained from the literature. Data were analyzed by multivariate chemometric methods. One of the most important unifying parameters (Slope) and the temperature correction coefficient were successfully modeled. The Offset and Translation unifying parameters were not modeled successfully, but these parameters can be estimated relatively easily through limited grain tests.

Actions (login required)

Edit Item