Items where Author is "Gubicza, Jenő"

Article

Nagy, Péter and Péter, László and Czigány, Zsolt and Nguyen Quang, Chinh and Gubicza, Jenő (2023) Processing and characterization of an electrodeposited nanocrystalline Co–Fe–Ni–Zn multi-principal element alloy film. SURFACE AND COATINGS TECHNOLOGY, 467. ArtNo:129740. ISSN 0257-8972

Nagy, Péter and Rohbeck, Nadia and Widmer, Remo N. and Hegedűs, Zoltán and Michler, Johann and Lábár, János and Gubicza, Jenő (2022) Combinatorial Study of Phase Composition, Microstructure and Mechanical Behavior of Co-Cr-Fe-Ni Nanocrystalline Film Processed by Multiple-Beam-Sputtering Physical Vapor Deposition. MATERIALS, 15 (6). ISSN 1996-1944

Pham, Tran Hung and Kawasaki, Megumi and Szabó, Ábel and Lábár, János L. and Hegedűs, Zoltán and Gubicza, Jenő (2022) Influence of Degree of Severe Plastic Deformation on Thermal Stability of an HfNbTiZr Multi-Principal Element Alloy Processed by High-Pressure Torsion. NANOMATERIALS, 12 (19). pp. 1-22. ISSN 2079-4991

Luong, Nguyen Hoang and Trung, Truong Thanh and Hong, Tran Thi and Nam, Nguyen Hoang and Phan, Manh-Huong and Jenei, Péter and Lábár, János and Gubicza, Jenő (2022) Relating the magnetic coercivity to the L10 ordered FePd phase in annealed FexPd100-x nanoparticles. APPLIED PHYSICS A - MATERIALS SCIENCE AND PROCESSING, 128 (10). ISSN 0947-8396

Zsurzsa, Sándor and El-Tahawy, Moustafa and Péter, László and Kiss, László and Gubicza, Jenő and Molnár, György and Bakonyi, Imre (2022) Spacer Layer Thickness Dependence of the Giant Magnetoresistance in Electrodeposited Ni-Co/Cu Multilayers. NANOMATERIALS, 12 (23). ISSN 2079-4991

Hung, Pham Tran and Kawasaki, Megumi and Han, Jae-Kyung and Szabó, Ábel and Lábár, János and Gubicza, Jenő (2022) Thermal stability of nanocrystalline CoCrFeNi multi-principal element alloy: Effect of the degree of severe plastic deformation. INTERMETALLICS, 142. ISSN 0966-9795

Kádár, Csilla and Park, Hyeji and Jenei, Péter and Kim, Myung-Yeon and Szabó, Ábel and Choe, Heeman and Gubicza, Jenő (2021) Investigation of the Compressive Behavior of a Freeze‐Cast Cu Foam Using Acoustic Emission Measurement. Advanced Engineering Materials. ISSN 1438-1656

Gubicza, Jenő and Jenei, Péter and Han, Gigap and Hung, Pham-Tran and Song, Youngseok and Park, Dahye and Szabó, Ábel and Kádár, Csilla and Kim, Jae-Hun and Choe, Heeman (2021) Effect of Heat Treatment on the Microstructure and Performance of Cu Nanofoams Processed by Dealloying. Materials, 14 (10). p. 2691. ISSN 1996-1944, ESSN: 1996-1944

Pham, Tran Hung and Kawasaki, Megumi and Han, Jae-Kyung and Lábár, János L. and Gubicza, Jenő (2021) Microstructure Evolution in a Nanocrystalline CoCrFeNi Multi-Principal Element Alloy During Annealing. MATERIALS CHARACTERIZATION, 171. pp. 1-9. ISSN 1044-5803

Nagy, Péter and Rohbeck, Nadia and Hegedűs, Zoltán and Michler, Johann and Pethő, László and Lábár, János and Gubicza, Jenő (2021) Microstructure, Hardness, and Elastic Modulus of a Multibeam-Sputtered Nanocrystalline Co-Cr-Fe-Ni Compositional Complex Alloy Film. MATERIALS, 14 (12). ISSN 1996-1944

Jenei, Péter and Kádár, Csilla and Han, Gigap and Tran Hung, Pham and Choe, Heeman and Gubicza, Jenő (2020) Annealing-Induced Changes in the Microstructure and Mechanical Response of a Cu Nanofoam Processed by Dealloying. Metals, 10 (9). ISSN 2075-4701

Gubicza, Jenő and El-Tahawy, Moustafa and Lábár, János and Bobruk, Elena V. and Murashkin, Maxim Yu. and Nguyen Quang, Chinh (2020) Evolution of microstructure and hardness during artificial aging of an ultrafine-grained Al-Zn-Mg-Zr alloy processed by high pressure torsion. JOURNAL OF MATERIALS SCIENCE, 55. pp. 16791-16805. ISSN 0022-2461

Kolonits, Tamás and Czigány, Zsolt and Péter, László and Bakonyi, Imre and Gubicza, Jenő (2020) Improved Hardness and Thermal Stability of Nanocrystalline Nickel Electrodeposited with the Addition of Cysteine. NANOMATERIALS, 10 (11). pp. 1-21. ISSN 2079-4991

Garima, Kapoor and Kvackaj, Tibor and Heczel, Anita and Bidulská, Jana and Kočiško, Róbert and Fogarassy, Zsolt and Gubicza, Jenő (2020) The Influence of Severe Plastic Deformation and Subsequent Annealing on the Microstructure and Hardness of a Cu–Cr–Zr Alloy. MATERIALS, 13 (10). ISSN 1996-1944

Jenei, Péter and Han, Gigap and Tran Hung, Pham and Choe, Heeman and Gubicza, Jenő (2020) Influence of pack cementation time on the microstructure of Cu nanofoams processed by dealloying. IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING, 903. ISSN 1757-8981

Gubicza, Jenő and Garima, Kapoor and Ugi, Dávid and Péter, László and Lábár, János and Radnóczi, György (2020) Micropillar Compression Study on the Deformation Behavior of Electrodeposited Ni–Mo Films. COATINGS, 10 (3). pp. 205-219. ISSN 2079-6412

Isnaini, V. A. and Kolonits, Tamás and Czigány, Zsolt and Gubicza, Jenő and Zsurzsa, Sándor and Varga, Lajos Károly and Péter, László and Bakonyi, Imre (2020) Room-temperature magnetoresistance of nanocrystalline Ni metal with various grain sizes. EUROPEAN PHYSICAL JOURNAL PLUS, 135 (1). ISSN 2190-5444

Song, Youngseok and Hwang, Junesun and Lee, Sukyung and Thirumalraj, Balamurugan and Kim, Jae-Hun and Jenei, Péter and Gubicza, Jenő and Choe, Heeman (2020) Synthesis of a High‐Capacity NiO/Ni Foam Anode for Advanced Lithium‐Ion Batteries. Advanced Engineering Materials. ISSN 1438-1656 (print); 1527-2648 (online)

Pham Tran, Hung and Kawasaki, Megumi and Jae-Kyung, Han and Lábár, János and Gubicza, Jenő (2020) Thermal stability of a nanocrystalline HfNbTiZr multi-principal element alloy processed by high-pressure torsion. MATERIALS CHARACTERIZATION, 168. ISSN 1044-5803

Gubicza, Jenő and Heczel, Anita and Kawasaki, Megumi and Han, Jae-Kyung and Zhao, Yakai and Lábár, János (2019) Evolution of microstructure and hardness in Hf25Nb25Ti25Zr25 high-entropy alloy during high-pressure torsion. JOURNAL OF ALLOYS AND COMPOUNDS, 788. pp. 318-328. ISSN 0925-8388

Kolonits, Tamás and Czigány, Zsolt and Péter, László and Bakonyi, Imre and Gubicza, Jenő (2019) Influence of Bath Additives on the Thermal Stability of the Nanostructure and Hardness of Ni Films Processed by Electrodeposition. COATINGS, 9 (10). pp. 1-17. ISSN 2079-6412

Gubicza, Jenő and Pham Tran, Hung and Megumi, Kawasaki and Jae-Kyung, Han and Yakai, Zhao and Lábár, János (2019) Influence of severe plastic deformation on the microstructure and hardness of a CoCrFeNi high-entropy alloy: A comparison with CoCrFeNiMn. MATERIALS CHARACTERIZATION, 154. pp. 304-314. ISSN 1044-5803

Garima, Kapoor and Péter, László and Fekete, Éva and Lábár, János L. and Gubicza, Jenő (2019) Stored energy in nanocrystalline Ni-Mo films processed by electrodeposition. JOURNAL OF ALLOYS AND COMPOUNDS, 796. pp. 307-313. ISSN 0925-8388

Zalka, Dóra and Péter, László and El-Tahawy, Moustafa and Gubicza, Jenő and Molnár, György and Bakonyi, Imre (2019) Structure and Giant Magnetoresistance of Co-Fe/Cu Multilayer Films Electrodeposited from Various Bath Formulations. JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 166 (16). D923-D934. ISSN 0013-4651

Gubicza, Jenő and Lábár, János L. and Lendvai, János and Nguyen, Q. Chinh (2019) The influence of artificial aging on the microstructure and hardness of an Al–Zn–Mg–Zr alloy processed by equal-channel angular pressing. JOURNAL OF MATERIALS SCIENCE, 54 (15). pp. 10918-10928. ISSN 0022-2461 (print); 1573-4803 (online)

Gubicza, Jenő and Jenei, Péter and Nam, Kyungju and Kádár, Csilla and Jo, Hyungyung and Choe, Heeman (2018) Compressive behavior of Cu-Ni alloy foams: Effects of grain size, porosity,pore directionality, and chemical composition. MATERIALS SCIENCE & ENGINEERING: A, 725. pp. 160-170. ISSN 0921-5093

Kolonits, Tamás and Jenei, Péter and Péter, László and Bakonyi, Imre and Czigány, Zsolt and Gubicza, Jenő (2018) Effect of bath additives on the microstructure, lattice defect density and hardness of electrodeposited nanocrystalline Ni films. SURFACE AND COATINGS TECHNOLOGY, 349. pp. 611-621. ISSN 0257-8972

Gubicza, Jenő and Németh, Regina and Park, Hyeji and Kim, Kyungbae and Kim, Jae-Hun and Óvári, Mihály and Mohai, Miklós (2018) Effect of lithiation on the microstructure of a cobalt foam processed by freeze casting. ADVANCED ENGINEERING MATERIALS, 20 (10). pp. 1-9. ISSN 1438-1656

Jenei, Péter and Balázsi, Csaba and Horváth, Ákos and Balázsi, Katalin and Gubicza, Jenő (2018) The influence of BN additives on the phase composition, microstructure and mechanical properties of 316L steel consolidated by spark plasma sintering. IOP Conference Series: Materials Science and Engineering, 426. ISSN 1757-8981

Kapoor, Garima and Péter, László and Fekete, Éva and Lábár, János and Gubicza, Jenő (2018) The influence of Mo addition on the microstructure and its thermal stability for electrodeposited Ni films. MATERIALS CHARACTERIZATION, 145. pp. 563-572. ISSN 1044-5803

Jenei, Péter and Balázsi, Csaba and Horváth, Ákos and Balázsi, Katalin and Gubicza, Jenő (2018) The influence of carbon nanotube addition on the phase composition, microstructure and mechanical properties of 316L stainless steel consolidated by spark plasma sintering. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY, 7. pp. 1-9. ISSN 2238-7854

El-Tahawy, Moustafa and Huang, Yi and Choi, Hyelim and Choe, Heeman and Lábár, János and Gubicza, Jenő (2017) High temperature thermal stability of nanocrystalline 316L stainless steel processed by high-pressure torsion. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 682. pp. 323-331. ISSN 0921-5093

El-Tahawy, Moustafa and Gubicza, Jenő and Huang, Yi and Choi, Hyelim and Choe, Heeman and Lábár, János (2017) The Influence of Plastic Deformation on Lattice Defect Structure and Mechanical Properties of 316L Austenitic Stainless Steel. MATERIALS SCIENCE FORUM, 885. pp. 12-18. ISSN 0255-5476

Csanády, Ágnes and Gábor, János and Jenei, Péter and Gubicza, Jenő and Szabó, Péter János and Fábián, Enikő Réka and Radnóczi, György and Tóth, Attila Lajos (2017) Secrets of Abraham Ganz’s Train Wheels Enlightened by Materials Science Methods. MATERIALS SCIENCE FORUM, 885. pp. 55-60. ISSN 0255-5476

El-Tahawy, Moustafa and Huang, Yi and Um, Taekyung and Choe, Heeman and Lábár, János and Gubicza, Jenő (2017) Stored energy in ultrafine-grained 316L stainless steel processed by high-pressure torsion. Journal of Materials Research and Technology, 6 (4). pp. 339-347. ISSN 2238-7854

Kolonits, Tamás and Jenei, Péter and G. Tóth, Bence and Czigány, Zsolt and Gubicza, Jenő (2016) Characterization of Defect Structure in Electrodeposited Nanocrystalline Ni Films. JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 163 (3). D107-D114. ISSN 0013-4651

Berecz, Tibor and Jenei, Péter and Csóré, András and Lábár, János and Gubicza, Jenő and Szabó, Péter János (2016) Determination of dislocation density by electron backscatter diffraction and X-ray line profile analysis in ferrous lath martensite. MATERIALS CHARACTERIZATION, 113. pp. 117-124. ISSN 1044-5803

Láng, Győző and Ujvári, Mária and Vesztergom, Soma and Kondratiev, Veniamin and Gubicza, Jenő (2016) The Electrochemical Degradation of Poly(3,4-ethylenedioxythiophene) Films Electrodeposited from Aqueous Solutions. ZEITSCHRIFT FUR PHYSIKALISCHE CHEMIE-INTERNATIONAL JOURNAL OF RESEARCH IN PHYSICAL CHEMISTRY & CHEMICAL PHYSICS, 230 (9). pp. 1281-1302. ISSN 0942-9352

El-Tahawy, Moustafa and Gubicza, Jenő and Huang, Yi and Choi, Hyelim and Choe, Heeman and Lábár, János (2016) Evolution of Microstructure, Phase Composition and Hardness in 316L Stainless Steel Processed by High-Pressure Torsion. Materials Science Forum, 879. pp. 502-507. ISSN 0255-5476

Gubicza, Jenő and El-Tahawy, Moustafa and Huang, Yi and Hyelim, Choi and Heeman, Choe and Lábár, János (2016) Microstructure, phase composition and hardness evolution in 316L stainless steel processed by high-pressure torsion. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCURE AND PROCESSING, 657. pp. 215-223. ISSN 0921-5093

Zsélyné Ujvári, Mária and Gubicza, Jenő and Kondratiev, V. and Szekeres, Krisztina Júlia and Láng, Győző (2015) Morphological changes in electrochemically deposited poly(3,4-ethylenedioxythiophene) films during overoxidation. JOURNAL OF SOLID STATE ELECTROCHEMISTRY, 19 (4). pp. 1247-1252. ISSN 1432-8488

Gubicza, Jenő and Hegedűs, Z. and Lábár, János (2015) Solute redistribution during annealing of a cold rolled Cu–Ag alloy. JOURNAL OF ALLOYS AND COMPOUNDS, 623. pp. 96-103. ISSN 0925-8388

Oláh, Nikolett and Veres, Miklós and Sulyok, Attila and Menyhárd, Miklós and Gubicza, Jenő and Balázsi, Katalin (2014) Examination of nanocrystalline TiC/amorphous C deposited thin films. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 34 (14). pp. 3421-3425. ISSN 0955-2219

Jenei, P. and Gubicza, Jenő and Yoon, E.Y. and Kim, H.S. and Lábár, János (2013) High temperature thermal stability of pure copper and copper - carbon nanotube composites consolidated by High Pressure Torsion. OMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 51. pp. 71-79. ISSN 1359-835X

Gubicza, Jenő and Lábár, János and Quynh, Luu Manh and Namc, Nguyen Hoang and Luong, Nguyen Hoang (2013) Evolution of size and shape of gold nanoparticles during long-time aging. MATERIALS CHEMISTRY AND PHYSICS, 138 (2-3). pp. 449-453. ISSN 0254-0584

Hegedűs, Zoltán and Gubicza, Jenő and Kawasaki, M. and Chinh, Nguyen Quang and Lábár, János and Langdon, T.G. (2013) Stability of the ultrafine-grained microstructure in silver processed by ECAP and HPT. Journal of Materials Science, 48. pp. 4637-4645. ISSN 0022-2461

Hegedűs, Zoltán and Gubicza, Jenő and Kawasaki, Megumi and Chinh, Nguyen Q. and Süvegh, Károly and Fogarassy, Zsolt and Langdon, Terence G. (2013) High temperature thermal stability of ultrafine-grained silver processed by equal-channel angular pressing. JOURNAL OF MATERIALS SCIENCE, 48 (4). pp. 1675-1684. ISSN 0022-2461 (print), 1573-4803 (online)

Jenei, Péter and Yoon, E.Y. and Gubicza, Jenő and Kim, H.S. and Lábár, János and Ungár, Tamás (2013) Microstructure and thermal stability of copper - carbon nanotube composites consolidated by High Pressure Torsion. Materials Science Forum, 729. pp. 228-233. ISSN 0255-5476

Dirras, G. and Gubicza, Jenő and Ramtani, S. and Bui, H. Q. and Szilágyi, T. (2010) Microstructure and mechanical characteristics of bulk polycrystalline Ni consolidated from blends of powders with different particle size. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCURE AND PROCESSING, 527. pp. 1206-1214. ISSN 0921-5093

Fellah, F. and Dirras, G. and Gubicza, Jenő and Schoenstein, F. and Jouini, N. (2010) Microstructure and mechanical properties of ultrafine-grained fcc/hcp cobalt processed by a bottom-up approach. JOURNAL OF ALLOYS AND COMPOUNDS, 489. pp. 424-428. ISSN 0925-8388

Gubicza, Jenő and Nguyen Quang, Chinh and Lábár, János and Hegedűs, Zoltán and Langdon, Terence G. (2010) Principles of self-annealing in silver processed by equal-channel angular pressing: The significance of a very low stacking fault energy. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCURE AND PROCESSING, 527. pp. 752-760. ISSN 0921-5093

Nguyen Quang, Chinh and Gubicza, Jenő and Czeppe, T. and Lendvai, János and Langdon, T. G. (2010) Processing Age-hardenable Alloys by Equal-Channel Angular Pressing at Room Temperature: Strategies and Advantages. MATERIALS SCIENCE FORUM, 633-63. pp. 527-534. ISSN 0255-5476

Gubicza, Jenő and Nguyen Quang, Chinh and Lábár, János and Dobatkin, S. and Hegedűs, Zoltán (2009) Correlation between microstructure and mechanical properties of severely deformed metals. JOURNAL OF ALLOYS AND COMPOUNDS, 483. pp. 271-274. ISSN 0925-8388

Nguyen Quang, Chinh and Gubicza, Jenő and Czeppe, T. and Lendvai, János and Xu, C. (2009) Developing a strategy for the processing of age-hardenable alloys by ECAP at room temperature. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCURE AND PROCESSING, 516. pp. 248-252. ISSN 0921-5093

Lendvai, János and Gubicza, Jenő and Lábár, János and Kuli, Z. (2009) Effect of crystallization on the deformation behavior of a Zr-based bulk metallic glass. INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 100. pp. 439-442. ISSN 1862-5282

Dirras, G. and Bouvier, S. and Gubicza, Jenő and Hasni, B. and Szilágyi, T. (2009) Mechanical characteristics under monotonic and cyclic simple shear of spark plasma sintered ultrafine-grained nickel. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCURE AND PROCESSING, 526. pp. 201-210. ISSN 0921-5093

Gubicza, Jenő and Bui, H. -Q. and Fellah, F. and Dirras, G. (2009) Microstructure and mechanical behavior of ultrafine-grained Ni processed by different powder metallurgy methods. JOURNAL OF MATERIALS RESEARCH, 24. pp. 217-226. ISSN 0884-2914

Gubicza, Jenő and Nguyen Quang, Chinh and Lábár, János and Tichy, Géza and Hegedűs, Zoltán (2009) Stability of microstructure in silver processed by severe plastic deformation. INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 100. pp. 884-887. ISSN 1862-5282

Gubicza, Jenő and Nguyen Quang, Chinh and Lábár, János and Hegedűs, Zoltán and Langdon, T. G. (2009) Twinning and dislocation activity in silver processed by severe plastic deformation. JOURNAL OF MATERIALS SCIENCE, 44. pp. 1656-1660. ISSN 0022-2461

Gubicza, Jenő and Chinh, Nguyen Quang and Lábár, János and Hegedűs, Zoltán and Szommer, Péter and Tichy, Géza and Langdon, Terence G. (2008) Delayed microstructural recovery in silver processed by equal-channel angular pressing. JOURNAL OF MATERIALS SCIENCE, 43 (16). pp. 5672-5676. ISSN 0022-2461 (print), 1573-4803 (online)

Nguyen Quang, Chinh and Gubicza, Jenő and Czeppe, T. and Lendvai, János and Hegedűs, Zoltán (2008) Effect of Pre-Aging on the Microstructure and Strength of Supersaturated AlZnMg Alloys Processed by ECAP. MATERIALS SCIENCE FORUM, 584-58. pp. 501-506. ISSN 0255-5476

Gubicza, Jenő and Lábár, János and Agócs, Emil and Fátay, D. and Lendvai, János (2008) Effect of nano-quasicrystals on viscosity of a Zr-based bulk metallic glass. Scripta Materialia, 58 (4). pp. 291-294. ISSN 1359-6462

Chowdhury, Sandip Ghosh and Mondal, Amit and Gubicza, Jenő and Krállics, György and Fodor, Árpád (2008) Evolution of microstructure and texture in an ultrafine-grained Al6082 alloy during severe plastic deformation. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCURE AND PROCESSING, 490 (1-2). pp. 335-342. ISSN 0921-5093

Lendvai, János and Fátay, D. and Gubicza, Jenő (2008) Indentation creep study on a Zr-based bulk metallic glass containing nano-quasicrystals. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCURE AND PROCESSING, 483-48. pp. 607-610. ISSN 0921-5093

Krállics, György and Fodor, A. and Gubicza, Jenő and Fogarassy, Zsolt (2008) Mechanical and microstructural characterisation of Al6082 ultra-fine grained alloy manufactured by ECAP combined with traditional forming processes. MATERIALS SCIENCE FORUM, 589. pp. 111-116. ISSN 0255-5476

Gubicza, Jenő and Fogarassy, Zsolt and Krállics, Gy. and Lábár, János and Törköly, T. (2008) Microstructure and mechanical behavior of ultrafine-grained titanium. Materials Science Forum, 589. pp. 99-104. ISSN 0255-5476

Bui, H -Q. and Dirras, G. F. and Hocini, A. and Ramtani, S. and Abdul-latif, A. and Gubicza, Jenő and Fogarassy, Zsolt (2008) Microstructure and mechanical properties of commercial purity HIPed and Crushed Aluminum. MATERIALS SCIENCE FORUM, 584-58. pp. 579-584. ISSN 0255-5476

Gubicza, Jenő and Chinh, Nguyen Quang and Lábár, János and Hegedűs, Zoltán and Xu, Cheng and Langdon, Terence G. (2008) Microstructure and yield strength of severely deformed silver. Scripta Materialia, 58 (9). pp. 775-778. ISSN 1359-6462

Dézsi, István and Fetzer, Cs. and Gombkötő, Á. and Szűcs, I. and Gubicza, Jenő and Ungár, Tamás (2008) Phase transition in nanomagnetite. Journal of Applied Physics, 103 (10). No. 104312. ISSN 0021-8979 (print), 1089-7550 (online)

Chinh, Nguyen Quang and Gubicza, Jenő and Langdon, T. G. (2007) Characteristics of face-centered cubic metals processed by equal-channel angular pressing. JOURNAL OF MATERIALS SCIENCE, 42 (5). pp. 1594-1605. ISSN 0022-2461 (print), 1573-4803 (online)

Gubicza, Jenő and Ungár, Tamás (2007) Characterization of defect structures in nanocrystalline materials by X-ray line profile analysis. Zeitschrift für Kristallographie, 222 (11). pp. 567-579. ISSN 0044-2968

Fátay, D. and Gubicza, Jenő and Lendvai, János (2007) Indentation creep behavior of a Zr-based bulk metallic glass. Journal of Alloys and Compounds, 434-43. pp. 75-78. ISSN 0925-8388

Gubicza, Jenő and Nauyoks, S. and Balogh, Levente and Lábár, János and Zerda, T. W. and Ungár, Tamás (2007) Influence of sintering temperature and pressure on crystallite size and lattice defect structure in nanocrystalline SiC. Journal of Materials Research, 22 (05). pp. 1314-1321. ISSN 0884-2914 (print), 2044-5326 (online)

Gubicza, Jenő and Chinh, Nguyen Quang and Szommer, P. and Vinogradov, A. and Langdon, T. G. (2007) Microstructural characteristics of pure gold processed by equal-channel angular pressing. Scripta Materialia, 56 (11). pp. 947-950. ISSN 1359-6462

Gubicza, Jenő and Dobatkin, S. and Bakai, Z. and Chinh, Nguyen Quang and Langdon, T. G. (2007) Microstructure and mechanical behavior of severely deformed f.c.c. metals. Materials Science Forum, 567-68. pp. 181-184. ISSN 0255-5476

Gubicza, Jenő and Chinh, Nguyen Quang and Csanádi, T. and Langdon, T. G. and Ungár, Tamás (2007) Microstructure and strength of severely deformed fcc metals. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCURE AND PROCESSING, 462 (1-2). pp. 86-90. ISSN 0921-5093

Gubicza, Jenő and Dirras, G. and Szommer, Péter and Bacroix, B. (2007) Microstructure and yield strength of ultrafine grained aluminum processed by hot isostatic pressing. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCURE AND PROCESSING, 458 (1-2). pp. 385-390. ISSN 0921-5093

Ungár, Tamás and Gubicza, Jenő (2007) Nanocrystalline materials studied by powder diffraction line profile analysis. Zeitschrift für Kristallographie, 222 (3-4). pp. 114-128. ISSN 0044-2968

Horváth, Győző and Chinh, Nguyen Quang and Gubicza, Jenő and Lendvai, János (2007) Plastic instabilities and dislocation densities during plastic deformation in Al–Mg alloys. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCURE AND PROCESSING, 445-44. pp. 186-192. ISSN 0921-5093

Mohai, Ilona and Gál, Lóránd and Szépvölgyi, János and Gubicza, Jenő and Farkas, Zsuzsa (2007) Synthesis of nanosized zinc ferrites from liquid precursors in RF thermal plasma reactor. Journal of the European Ceramic Society, 27 (2-3). pp. 941-945. ISSN 0955-2219

Gubicza, Jenő and Schiller, I. and Chinh, Nguyen Quang and Illy, J. and Horita, Z. and Langdon, T. G. (2007) The effect of severe plastic deformation on precipitation in supersaturated Al–Zn–Mg alloys. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCURE AND PROCESSING, 460-46. pp. 77-85. ISSN 0921-5093

Gubicza, Jenő and Ungár, Tamás and Wang, Y. and Voronin, G. and Pantea, C. and Zerda, T.W. (2006) Microstructure of diamond–SiC nanocomposites determined by X-ray line profile analysis. Diamond and Related Materials, 15 (9). pp. 1452-1456. ISSN 0925-9635

Gubicza, Jenő and Nam, N. H. and Máthis, K. and Stolyarov, V. V. (2006) Microstructure of severely deformed metals from X-ray line profile analysis. Zeitschrift für Kristallographie, 23. pp. 93-98. ISSN 0044-2968

Gubicza, Jenő and Chinh, Nguyen Quang and Krállics, György and Schiller, I. and Ungár, Tamás (2006) Microstructure of ultrafine-grained fcc metals produced by severe plastic deformation. Current Applied Physics, 6 (2). pp. 194-199. ISSN 1567-1739

Balogh, L. and Gubicza, Jenő and Hellmig, R. J. and Estrin, Y. and Ungár, Tamás (2006) Thermal stability of the microstructure of severely deformed copper. Zeitschrift für Kristallographie Supplements, 23. pp. 381-386. ISSN 0930-486X

Ungár, Tamás and Tichy, Géza and Gubicza, Jenő and Hellmig, R. J. (2005) Correlation between subgrains and coherently scattering domains. Powder Diffraction, 20 (4). pp. 366-375. ISSN 0885-7156

Gubicza, Jenő and Balogh, L. and Hellmig, R. J. and Estrin, Y. and Ungár, Tamás (2005) Dislocation structure and crystallite size in severely deformed copper by X-ray peak profile analysis. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCURE AND PROCESSING, 400. pp. 334-338. ISSN 0921-5093

Máthis, Krisztián and Gubicza, Jenő and Nam, N. H. (2005) Microstructure and mechanical behavior of AZ91 Mg alloy processed by equal channel angular pressing. Journal of Alloys and Compounds, 394 (1-2). pp. 194-199. ISSN 0925-8388

Ungár, Tamás and Gubicza, Jenő and Tichy, Géza and Pantea, C. and Zerda, T. W. (2005) Size and shape of crystallites and internal stresses in carbon blacks. Composites Part A: Applied Science and Manufacturing, 36 (4). pp. 431-436. ISSN 1359-835X

Baretzky, B. and Baró, M. D. and Grabovetskaya, G. P. and Gubicza, Jenő and Ivanov, M. B. and Kolobov, Yu. R. and Langdon, T. G. and Lendvai, János and Lipnitskii, A. G. and Mazilkin, A. A. and Nazarov, A. A. and Nogués, J. and Ovidko, I. A. and Protasova, S. G. and Raab, G. I. and Révész, Ádám and Skiba, N. V. and Sort, J. and Starink, M. J. and Straumal, B. B. and Surinach, S. and Ungár, Tamás and Zhilyaev, A. P. (2005) Fundamentals of interface phenomena in advanced bulk nanoscale materials. Reviews on Advanced Materials Science, 9 (1). pp. 45-108. ISSN 1606-5131

Palosz, B. and Grzanka, E. and Pantea, C. and Zerda, T. W. and Wang, I. and Gubicza, Jenő and Ungár, Tamás (2005) Microstructure of nanocrystalline diamond powders studied by powder diffractometry. Journal of Applied Physics, 97 (6). Art.No. 064316.. ISSN 0021-8979 (print), 1089-7550 (online)

Ribárik, Gábor and Gubicza, Jenő and Ungár, Tamás (2004) Correlation between strength and microstructure of ball-milled Al-Mg alloys determined by X-ray diffraction. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCURE AND PROCESSING, 387-89. pp. 343-347. ISSN 0921-5093

Gubicza, Jenő and Chinh, Nguyen Quang and Horita, Z. and Langdon, T. G. (2004) Effect of Mg addition on microstructure and mechanical properties of aluminum. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCURE AND PROCESSING, 387-89. pp. 55-59. ISSN 0921-5093

Kiss, László and Kaptás, Dénes and Balogh, Sára Judit and Bujdosó, László and Gubicza, Jenő and Kemény, Tamás and Vincze, Imre (2004) Magnetic properties of ball-milled FeAl nanograins. Physica Status Solidi A - Applications and Materials Science, 201 (15). pp. 3333-3337. ISSN 0031-8965

Pantea, C. and Gubicza, Jenő and Ungár, Tamás and Voronin, G. A. and Nam, N. H. and Zerda, T. W. (2004) High-pressure effect on dislocation density in nanosize diamond crystals. Diamond and Related Materials, 13 (10). pp. 1753-1756. ISSN 0925-9635

Shapaan, Mahmoud and Gubicza, Jenő and Lendvai, János and Varga, Lajos Károly (2004) Crystallization behavior of (Fe100-xCox)(62)Nb8B30 bulk amorphous alloy. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCURE AND PROCESSING, 375-77. pp. 785-788. ISSN 0921-5093

Gubicza, Jenő and Kassem, M. and Ribárik, Gábor and Ungár, Tamás (2004) The microstructure of mechanically alloyed Al-Mg determined by X-ray diffraction peak profile analysis. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCURE AND PROCESSING, 372 (1-2). pp. 115-122. ISSN 0921-5093

Chinh, Nguyen Quang and Gubicza, Jenő and Kovács, Zsolt and Lendvai, János (2004) Depth-sensing indentation tests in studying plastic instabilities. Journal of Materials Research, 19 (1). pp. 31-45. ISSN 0884-2914 (print), 2044-5326 (online)

Voronin, G. A. and Zerda, T. W. and Gubicza, Jenő and Ungár, Tamás and Dub, S. N. (2004) Properties of nanostructured diamond-silicon carbide composites sintered by high pressure infiltration technique. Journal of Materials Research, 19 (9). pp. 2703-2707. ISSN 0884-2914 (print), 2044-5326 (online)

Kiss, László and Kaptás, Dénes and Balogh, Sára Judit and Bujdosó, László and Kemény, Tamás and Vincze, Imre and Gubicza, Jenő (2004) Rigid magnetic foam-like behavior in ball-milled FeAl. PHYSICAL REVIEW B CONDENSED MATTER, 70 (1). 012408. ISSN 0163-1829

Kiss, László and Kaptás, Dénes and Balogh, Judit and Gubicza, Jenő and Kemény, Tamás and Vincze, Imre (2004) Study of the unusual increase in the Curie temperature of the residual amorphous phase in nanocrystalline Fe90Zr7B2Cu1. Journal of Magnetism and Magnetic Materials, 272-76. pp. 1410-1412. ISSN 0304-8853

Gubicza, Jenő and Dragomir, I. C. and Ribárik, Gábor and Baik, S. C. and Zhu, Y. T. and Valiev, R. Z. and Ungár, Tamás (2003) Dislocation structure and crystallite size distribution in plastically deformed Ti determined by X-ray peak profile analysis. Zeitschrift für Metallkunde, 94 (11). pp. 1185-1188. ISSN 0044-3093

Zhu, Y. T. and Huang, J. Y. and Gubicza, Jenő and Ungár, Tamás and Wang, Y. M. and Ma, E. and Valiev, R. Z. (2003) Nanostructures in Ti processed by severe plastic deformation. Journal of Materials Research, 18 (8). pp. 1908-1917. ISSN 0884-2914 (print), 2044-5326 (online)

Zhilyaev, A. P. and Gubicza, Jenő and Nurislamova, G. and Révész, Ádám and Surinach, S. and Baró, M. D. and Ungár, Tamás (2003) Microstructural characterization of ultrafine-grained nickel. Physica Status Solidi A - Applications and Materials Science, 198 (2). pp. 263-271. ISSN 0031-8965

Fátay, D. and Bastarash, E. and Nyilas, K. and Dobatkin, S. and Gubicza, Jenő and Ungár, Tamás (2003) X-ray diffraction study on the microstructure of an Al-Mg-Sc-Zr alloy deformed by high-pressure torsion. Zeitschrift für Metallkunde, 94 (7). pp. 842-847. ISSN 0044-3093

Ungár, Tamás and Gubicza, Jenő (2002) Dislocation structure and crystallite size distribution in hexagonal nanomaterials from X-ray peak profile analysis. Zeitschrift für Metallkunde, 93 (7). pp. 694-698. ISSN 0044-3093

Ungár, Tamás and Ribárik, Gábor and Gubicza, Jenő and Hanák, P. (2002) Dislocation structure and crystallite size distribution in plastically deformed metals determined by diffraction peak profile analysis. Journal of Engineering Materials and Technology, 124 (1). pp. 2-6. ISSN 0094-4289 (print), 1528-8889 (online)

Pantea, C. and Gubicza, Jenő and Ungár, Tamás and Voronin, G. and Zerda, T. (2002) Dislocation density and graphitization of diamond crystals. Physical Review B (Condensed Matter), 66 (9). no. 094106. ISSN 0163-1829

Ungár, Tamás and Gubicza, Jenő and Ribárik, Gábor and Pantea, C. and Zerda, T. W. (2002) Microstructure of carbon blacks determined by X-ray diffraction profile analysis. Carbon, 40 (6). pp. 929-937. ISSN 0008-6223

Gubicza, Jenő and Ribárik, Gábor and Bakonyi, Imre and Ungár, Tamás (2001) Crystallite-size distribution and dislocation structure in nanocrystalline HfNi5 determined by X-ray diffraction profile analysis. Journal of Nanoscience and Nanotechnology, 1 (3). pp. 343-348. ISSN 1533-4880 (nyomtatott); 1533-4899 (online)

Ungár, Tamás and Gubicza, Jenő and Ribárik, Gábor and Borbély, A. (2001) Crystallite size distribution and dislocation structure determined by diffraction profile analysis: principles and practical application to cubic and hexagonal crystals. JOURNAL OF APPLIED CRYSTALLOGRAPHY, 34. pp. 298-310. ISSN 0021-8898

Szépvölgyi, János and Mohai, Ilona and Gubicza, Jenő (2001) Atmospheric ageing of nanosized silicon nitride powders. JOURNAL OF MATERIALS CHEMISTRY, 11 (3). pp. 859-863. ISSN 0959-9428

Gubicza, Jenő and Ribárik, Gábor and Szépvölgyi, János and Mohai, Ilona and Ungár, Tamás (2001) Crystallite size distribution and dislocation density in nanocrystalline silicon nitride powders produced by two different procedures. Materials World, 2 (2). pp. 1-8. ISSN 0967-8638

Ribárik, Gábor and Ungár, Tamás and Gubicza, Jenő (2001) MWP-fit: a program for multiple whole-profile fitting of diffraction peak profiles by ab initio theoretical functions. JOURNAL OF APPLIED CRYSTALLOGRAPHY, 34 (5). pp. 669-676. ISSN 0021-8898

Gubicza, Jenő and Szépvölgyi, János and Mohai, Ilona and Ribárik, Gábor and Ungár, Tamás (2000) The effect of heat-treatment on the grain-size of nanodisperse plasmathermal silicon nitride powder. JOURNAL OF MATERIALS SCIENCE, 35 (15). pp. 3711-3717. ISSN 0022-2461 (print), 1573-4803 (online)

Gubicza, Jenő and Szépvölgyi, János and Mohai, Ilona and Zsoldos, L. and Ungár, Tamás (2000) Particle size distribution and dislocation density determined by high resolution X-ray diffraction in nanocrystalline silicon nitride powders. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCURE AND PROCESSING, 280 (2). pp. 263-269. ISSN 0921-5093

Gubicza, Jenő and Wéber, Ferenc (1999) Comparison of oxidation behaviour of sintered ceramics produced from various silicon nitride powders. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCURE AND PROCESSING, 263 (1). pp. 101-104. ISSN 0921-5093

Gubicza, Jenő and Arató, Péter and Wéber, Ferenc and Juhász, A. (1999) Mechanical properties of oxidized silicon nitride ceramics. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCURE AND PROCESSING, 259 (1). pp. 65-72. ISSN 0921-5093

Gubicza, Jenő and Arató, Péter and Wéber, Ferenc (1998) Elastic modulus of oxidation-formed silicon nitride composite. Journal of Materials Science Letters, 17 (8). pp. 615-618. ISSN 0261-8028 (print), 1573-4811 (online)

Gubicza, Jenő and Rozlosnik, N. and Juhász, A. (1997) Comment on "Indentation size effect: reality or artefact?". Journal of Materials Science Letters, 16 (23). pp. 1904-1905. ISSN 0261-8028 (print), 1573-4811 (online)

Gubicza, Jenő and Juhász, András (1997) Mechanikai tulajdonságok meghatározása a mélységérzékeny Vickers-keménységmérés módszerével. Bányászati és Kohászati Lapok - Kohászat, 130. pp. 315-318. ISSN 0005-5670

Gubicza, Jenő and Juhász, A. and Arató, Péter and Szommer, Péter and Tasnádi, P. and Voros, G. (1996) Elastic modulus determination from depth sensing indentation testing. Journal of Materials Science Letters, 15 (24). pp. 2141-2144. ISSN 0261-8028 (print), 1573-4811 (online)

Gubicza, Jenő and Juhász, A. and Lendvai, János (1996) A new method for hardness determination from depth sensing indentation tests. Journal of Materials Research, 11 (12). pp. 2964-2967. ISSN 0884-2914 (print), 2044-5326 (online)

Gubicza, Jenő and Juhász, A. and Tasnádi, P. and Arató, Péter and Voros, G. (1996) Determination of the hardness and elastic modulus from continuous Vickers indentation testing. JOURNAL OF MATERIALS SCIENCE, 31 (12). pp. 3109-3114. ISSN 0022-2461 (print), 1573-4803 (online)

Gubicza, Jenő (1995) CHARACTERIZATION OF GLASSES AND CERAMICS BY CONTINUOUS INDENTATION TESTS. Key Engineering Materials, 103. pp. 217-220. ISSN 1013-9826

Book Section

Kolonits, Tamás and Jenei, Péter and G. Tóth, Bence and Czigány, Zsolt and Gubicza, Jenő (2015) TEM INVESTIGATION OF GRAIN AND DEFECT STRUCTURE IN ELECTRODEPOSITED NANOCRYSTALLINE NICKEL. In: 12th Multinational Congress on Microscopy. Akadémiai Kiadó, Budapest, pp. 456-458. ISBN 978-963-05-9653-4

Hegedűs, Zoltán and Gubicza, Jenő and Kawasaki, M. and Chinh, Nguyen Quang and Fogarassy, Zsolt and Langdon, T. G. (2013) The influence of impurity content on thermal stability of low stacking fault energy silver processed by severe plastic deformation. In: Materials Science, Testing and Informatics VI: 8th Hungarian Conference on Materials Science. 8th Hungarian Conference on Materials Science, 729 . Trans Tech Publications, Zürich, pp. 222-227. ISBN 978-303-785-491-4

Ungár, Tamás and Schafler, E. and Gubicza, Jenő (2009) Microstructure of Bulk Nanomaterials Determined by X-Ray Line Profile Analysis. In: Bulk nanostructured materials. Wiley-VCH, Weinheim, pp. 361-386. ISBN 978-3-527-31524-6

Dirras, G. F. and Gubicza, Jenő and Bui, H. Q. (2008) Ultrafine-grained materials processed from nanopowders: Microstructures and mechanical properties. In: Proceedings of 18th DYMAT Technical Meeting. Fraunhofer IRB Verlag, Freiburg; Munchen, pp. 25-32. ISBN 2-9517947-3-8

Gubicza, Jenő and Schiller, I. and Chinh, Nguyen Quang and Illy, J. (2007) Precipitation microstructure of ultrafine-grained Al-Zn-Mg alloys processed by severe plastic deformation. In: MATERIALS SCIENCE, TESTING AND INFORMATICS III. Materials Science Forum (537-38). Trans Tech Publications, Zürich, pp. 169-176. ISBN 978-0-87849-426-2

Gubicza, Jenő and Chinh, Nguyen Quang and Langdon, T. G. and Ungár, Tamás (2006) Microstructure and strength of metals processed by severe plastic deformation. In: Ultrafine grained materials. Minerals, Metals and Materials Society, Warrendale, pp. 231-236. ISBN 9780873396288

Schiller, I. and Gubicza, Jenő and Kovács, Zsolt and Chinh, Nguyen Quang and Illy, J. (2006) Precipitation and mechanical properties of supersaturated Al-Zn-Mg alloys processed by severe plastic deformation. In: ALUMINIUM ALLOYS 2006, PTS 1 AND 2 - RESEARCH THROUGH INNOVATION AND TECHNOLOGY. Materials Science Forum (519-21). Trans Tech Publications, Zürich, pp. 835-840. ISBN 0-87849-408-1

Gubicza, Jenő and Fátay, Dániel and Nyilas, Krisztián and Bastarash, Elena and Dobatkin, Sergey and Ungár, Tamás (2004) X-ray Peak Profile Analysis on the Microstructure of Al-5.9%Mg-0.3%Sc-0.18%Zr Alloy Deformed by High Pressure Torsion Straining. In: Proceedings of the 2nd International Conference on Nanomaterials by Severe Plastic Deformation: Fundamentals – Processing – Applications. Wiley - VCH Verlag GmbH - KGaA, Malden, pp. 420-425. ISBN 9783527306596

Gubicza, Jenő and Kassem, M. and Ungár, Tamás (2002) Formation of nanocrystalline aluminum magnesium alloys by mechanical alloying. In: Proceedings of the 3rd International Powder Metallurgy Conference. Turkish Powder Metallurgy Association, Ankara, pp. 741-755. ISBN 975-924630-9

Ungár, Tamás and Gubicza, Jenő (2002) Grain size, size-distribution and dislocation structure from diffraction peak profile analysis. In: Proceedings of Second International Symposium on Ultrafine Grained Materials. Minerals, Metals and Materials Society, Warrendale, pp. 595-604. ISBN 0-87339-523-9

Gubicza, Jenő and Arató, Péter and Wéber, Ferenc (1999) Oxidation-induced changes in mechanical properties of silicon nitride ceramics. In: Ceramics: getting into the 2000's: Proceedings of the World Ceramics Congress, part of the 9th CIMTEC-World Ceramics Congress and Forum on New Materials. Techna, Faenza, pp. 743-751.

Monograph

Ungár, Tamás and Balogh, Levente and Borbély, András and Gubicza, Jenő and Lendvai, János and Ribárik, Gábor and Szenes, György and Tichy, Géza (2013) Csúszási rendszerek, Burgers vektor és rétegződési hibák meghatározás köbös, ortorhombos és hexagonális rendszerekben a röntgen vonalprofil analízis módszere alapján = Active slip-systems, Burgers vectors and twinning in hexagonal, cubic and ortorhombic systems determined by X-ray line profile analysis. Project Report. OTKA.

Conference or Workshop Item

Szépvölgyi, János and Gál, L. and Mohai, Ilona and Mészáros, I. and Gubicza, Jenő (2007) Synthesis of Spinel Ferrites in Radiofrequency Thermal Plasma Reactor. In: 18th International Symposium on Plasma Chemistry, 2007.08.26-2007.08.31., Kyoto, Japán.

Gál, L. and Mohai, Ilona and Mészáros, I. and Gubicza, Jenő and Szépvölgyi, János (2007) Synthesis of Zinc Ferrites in RF Thermal Plasma Reactor. In: 10th International Conference and Exhibition of the European Ceramic Society, 2007.06.17-2007.06.21., Berlin, Németország.

Főglein, K. A. and Gubicza, Jenő and Babievskaya, I. V. and Szépvölgyi, János (2007) Theoretical and experimental aspects of carbon formation in thermal plasma. In: 18th International Symposium on Plasma Chemistry, 2007.08.26-2007.08.31., Kyoto, Japán.

Gubicza, Jenő and Krállics, György and Schiller, I. and Malgin, D. (2005) Evolution of the microstructure of Al 6082 alloy during equal-channel angular pressing. In: 4th Hungarian Conference on Materials Science, Testing and Informatics, 2003. október 12-14., Balatonfüred, Magyarország.

Fátay, D. and Gubicza, Jenő and Szommer, Péter and Lendvai, János and Bletry, M. and Guyot, P. (2004) Thermal stability and mechanical properties of a Zr-based bulk amorphous alloy. In: 13th International Conference on the Strength of Materials (ICSMA 13), 2003. augusztus, Budapest, Hungary.

Gubicza, Jenő and Nam, N. H. and Balogh, L. and Hellmig, R. J. and Stolyarov, V. V. and Estrin, Y. and Ungár, Tamás (2004) Microstructure of severely deformed metals determined by X-ray peak profile analysis. In: 9th International Symposium on Physics of Materials, 2003. szeptember 1-4., Prága, Csehország.

Kemény, Tamás and Kiss, László and Kaptás, Dénes and Balogh, Sára Judit and Bujdosó, László and Gubicza, Jenő and Vincze, Imre (2004) Superparamagnetic behaviour of Fe80B12Zr7Cu alloys with different fractions of primary nanocrystalline phase. In: 11th International Conference on Rapidly Quenched and Metastable Materials (RQ11), 2002. augusztus 25-30., Oxford University, Oxford, England.

Szépvölgyi, János and Mohai, Ilona and Gubicza, Jenő and Sáray, I. (2004) RF thermal plasma synthesis of ferrite nanopowders from metallurgical wastes. In: 8th Conference and Exhibition of the European Ceramic Society, 2003. június 29. - július 3., Istanbul, Turkey.

Szépvölgyi, János and Mohai, Ilona and Gubicza, Jenő (2004) Studies on atmospheric ageing of nanosized silicon nitride powders. In: 8th Conference and Exhibition of the European Ceramic Society, 2003. június 29. - július 3., Istanbul, Turkey.

Gubicza, Jenő and Kassem, M. and Ungár, Tamás (2004) The microstructure of mechanically alloyed nanocrystalline aluminium-magnesium. In: 8th European Powder Diffraction Conference, 2002. május 23-26., Uppsala, Svédország.

Zhilyaev, A. P. and Gubicza, Jenő and Surinach, S. and Baró, M. D. and Langdon, T. G. (2003) Calorimetric and X-ray measurements in ultrafine-grained nickel. In: 4th International Conference on Processing and Manufacturing of Advanced Materials, 2003. július 7-11., UNIVERSIDAD CARLOS III DE MADRID; MADRID, SPAIN.

Gubicza, Jenő and Dragomir, I. C. and Ribárik, Gábor and Zhu, Y. T. and Valiev, R. Z. and Ungár, Tamás (2003) Characterization of the microstructure of severely deformed titanium by X-ray diffraction profile analysis. In: 3rd Hungarian Conference and Exhibition on Materials Science, Testing and Informatics, 2001. október 14-17., Balatonfüred, Magyarország.

Ungár, Tamás and Gubicza, Jenő and Hanák, P. and Alexandrov, I. (2001) Densities and character of dislocations and size-distribution of subgrains in deformed metals by X-ray diffraction profile analysis. In: 12th International Conference on the Strength of Materials (ICSMA 12), 2000. augusztus 27. - szeptember 1., ASILOMAR, CA.

Gubicza, Jenő and Ribárik, Gábor and Goren-Muginstein, G. R. and Rosen, A. R. and Ungár, Tamás (2001) The density and the character of dislocations in cubic and hexagonal polycrystals determined by X-ray diffraction. In: International Conference on the Fundamentals of Plastic Deformation, 2000. június 19-22., GAITHERSBURG, MD.

Mohai, Ilona and Szépvölgyi, János and Bertóti, Imre and Mohai, Miklós and Gubicza, Jenő and Ungár, Tamás (2001) Thermal plasma synthesis of zinc ferrite nanopowders. In: 14th International Symposium on the Reactivity of Solids (XIVth ISRS), 2000. augusztus 27-31., Budapest, Hungary.

Somogyvári, Zoltán and Sváb, Erzsébet and Mészáros, György and Krezhov, K. and Konstantinov, P. and Ungár, Tamás and Gubicza, Jenő (2001) Magnetic cation distribution in a nanocrystalline Fe(3)O(4) spinel. In: 7th European Powder Diffraction Conference (EPDIC 7), 2000. május 20-23., Barcelona, Spain.

Gubicza, Jenő and Ribárik, Gábor and Bakonyi, Imre and Ungár, Tamás (2001) Microstructure of a rapidly quenched nanocrystalline Hf11Ni89 alloy from X-ray diffraction. In: EUROMAT-2001 Conference, 2001, Rimini, Italy.

Mohai, Ilona and Szépvölgyi, János and Gubicza, Jenő (2001) Synthesis of zinc ferrite nanopowders in an RF thermal plasma. In: 15th International Symposium on Plasma Chemistry, 2001.07.09-2001.07.13., Orléans, Franciaország.

Gubicza, Jenő and Szépvölgyi, János and Mohai, I. and Ungár, Tamás (2001) X-ray line profile analysis of nanodisperse silicon nitride ceramics. In: 7th European Powder Diffraction Conference, 2000. május 23., Barcelona, Spain.

Ungár, Tamás and Gubicza, Jenő and Ribárik, Gábor and Zerda, T. W. (2000) X-ray diffraction study of crystallite size-distribution and strain in carbon blacks. In: Materials Research Society Symposium, 2000. november 27 - december 1., Boston, Amerikai Egyesült Államok.

Gubicza, Jenő (1997) Determination of Young's modulus from depth sensing Vickers Indentation tests. In: Eotvos-Graduate-School Summer Course on Structure Development in Condensed Matter, 1996. augusztus 24-29., Budapest, Hungary.