An Analysis of Manufacturing Precision of Involute Worms Using a Kinematical Model

Kelemen, Csongor and Máté, Márton (2021) An Analysis of Manufacturing Precision of Involute Worms Using a Kinematical Model. Papers on Technical Science, 14. pp. 44-50. ISSN 2601-5773

Preview

Text 10.33894_mtk-2021.14.07.pdf Available under License Creative Commons Attribution Non-commercial No Derivatives. Download (1MB) | Preview

Abstract

The manufacturing precision of involute worms constitutes a major requirement. On the one hand, the worm constitutes the input element of the worm drive; secondly, the involute helical surface is the basic surface of an involute worm-hob. This paper presents an analytic comparison between the involute surfaces obtained using theoretical equations, kinematic simulation of the cutting and the surface charged with errors. The surface error is considered the distance along the normal direction to the theoretical surface, measured between this and the surface charged with simulated manufacturing errors. The main sources of errors are considered the center-error of the edge plane, the edge profile error and deviation of the axial feed direction from the axis of the worm. The theoretical results allow us to conclude that the influence of the edge profile error is the largest. It is followed by the parallelism error between the feed direction and the axis of the worm, and finally, the center error of the tool edge.

Actions (login required)

Edit Item