Additívan gyártott PCTG és PETG-PTFE anyagpárok tribológiai vizsgálata pin-on-disk módszerrel

Zsibók, Marcell and Zwierczyk, Péter Tamás (2026) Additívan gyártott PCTG és PETG-PTFE anyagpárok tribológiai vizsgálata pin-on-disk módszerrel. GÉP, 77 (3-4). pp. 121-126. ISSN 0016-8572

Preview

Text gep2026-3-4-27.pdf - Published Version Download (569kB) | Preview

Abstract

The aim of this study was the tribological prescreening of additively manufactured PCTG and PETGPTFE polymer material pairs to support material selection for subsequent dry-running polymer gear investigations. Homogeneous PCTG–PCTG and PETGPTFE–PETG-PTFE pairs and the heterogeneous PCTG–PETG-PTFE pair in both pin–disk role assignments were compared under identical loading and kinematic conditions. Specimens with layer heights of 0.16 and 0.20 mm were evaluated. The PCTG–PCTG pairs exhibited the least favourable behaviour, losing stable contact after approximately 1 minute at both layer heights. In contrast, both heterogeneous configurations at 0.20 mm completed the nominal 10 min test with a temperature rise of only about 14–15 °C. At 0.16 mm, a marked role asymmetry was observed, while the PETGPTFE–PETG-PTFE pair showed layer-height-dependent behaviour. The results indicate that, in addition to the individual material properties, the tribological compatibility between the mating polymers is relevant to the screening of additively manufactured polymer machine elements. The heterogeneous PCTG–PETGPTFE pair is therefore a candidate for repeated and gear-scale investigations.

Actions (login required)

View Item