Items where Author is "Lendvai, László"

Article

Jakab, Sándor Kálmán and Singh, Tej and Fekete, Imre and Lendvai, László (2024) Agricultural by-product filled poly(lactic acid) biocomposites with enhanced biodegradability : The effect of flax seed meal and rapeseed straw. COMPOSITES PART C: OPEN ACCESS, 14. No. 100464. ISSN 2666-6820

Lendvai, László and Fekete, Imre and Rigotti, Daniele and Pegoretti, Alessandro (2024) Experimental study on the effect of filament-extrusion rate on the structural, mechanical and thermal properties of material extrusion 3D-printed polylactic acid (PLA) products. PROGRESS IN ADDITIVE MANUFACTURING. ISSN 2363-9512 (In Press)

Lendvai, László and Fekete, Imre and Jakab, Sándor Kálmán and Szarka, Györgyi Éva and Verebélyi, Klára and Iván, Béla (2024) Influence of environmental humidity during filament storage on the structural and mechanical properties of material extrusion 3D-printed poly(lactic acid) parts. RESULTS IN ENGINEERING, 24. No.-103013. ISSN 2590-1230 (In Press)

Lendvai, László (2023) Lignocellulosic agro-residue/polylactic acid (PLA) biocomposites: Rapeseed straw as a sustainable filler. CLEANER MATERIALS, 9. No-100196. ISSN 2772-3976

Lendvai, László and Omastová, Mária and Patnaik, Amar and Dogossy, Gábor and Singh, Tej (2023) Valorization of Waste Wood Flour and Rice Husk in Poly(Lactic Acid)-Based Hybrid Biocomposites. JOURNAL OF POLYMERS AND THE ENVIRONMENT, 31. pp. 541-551. ISSN 1566-2543

Singh, Tej and Pattnaik, Punyasloka and Aherwar, Amit and Ranakoti, Lalit and Dogossy, Gábor and Lendvai, László (2022) Optimal Design of Wood/Rice Husk-waste-Filled PLA Biocomposites Using Integrated CRITIC–MABAC-Based Decision-Making Algorithm. POLYMERS, 14 (13). ISSN 2073-4360

Singh, Tej and Pattnaik, Punyasloka and Kumar, Shiv Ranjan and Fekete, Gusztáv and Dogossy, Gábor and Lendvai, László (2022) Optimization on physicomechanical and wear properties of wood waste filled poly(lactic acid) biocomposites using integrated entropy-simple additive weighting approach. SOUTH AFRICAN JOURNAL OF CHEMICAL ENGINEERING, 41. pp. 193-202. ISSN 1026-9185

Singh, Tej and Patnaik, Amar and Ranakoti, Lalit and Dogossy, Gábor and Lendvai, László (2022) Thermal and Sliding Wear Properties of Wood Waste-Filled Poly(Lactic Acid) Biocomposites. POLYMERS, 14 (11). No-2230. ISSN 2073-4360

Lendvai, László and Karger-Kocsis, József (2018) A kaucsuk adagolási módjának hatása szívósított polipropilén minták mechanikai és morfológiai tulajdonságaira. POLIMEREK, 4 (11). pp. 352-356. ISSN 2415-9492

Lendvai, László and Kmetty, Ákos and Karger-Kocsis, József (2017) Preparation and properties of thermoplastic starch/bentonite nanocomposites. MATERIALS SCIENCE FORUM, 885. pp. 129-134. ISSN 0255-5476

Lendvai, László and Kmetty, A. (2015) Természetes növényi latex és mikro-fibrilláris cellulóz termoplasztikus keményítőre gyakorolt hatásának vizsgálata. POLIMEREK, 1 (4). pp. 113-117. ISSN 2415-9492

Lendvai, László and Karger-Kocsis, József and Kmetty, Ákos and Drakopoulos, Stavros X. (2015) Production and characterization of microfibrillated cellulose-reinforced thermoplastic starch composites. Journal of Applied Polymer Science, 133 (2). n/a-n/a. ISSN 0021-8995

Karger-Kocsis, József and Kmetty, Ákos and Lendvai, László and Drakopoulos, Stavros and Bárány, Tamás (2014) Water-Assisted Production of Thermoplastic Nanocomposites: A Review. Materials, 8 (1). pp. 72-95. ISSN 1996-1944

Book Section

Lendvai, László (2024) Gyártási körülmények hatásának vizsgálata additív feldolgozásra szánt akrilnitril butadién sztirol alapanyagra. In: Új Nemzeti Kiválóság Program 2023/2024 Tanulmánykötet. Új Nemzeti Kiválóság Program Tanulmánykötet . Széchenyi István University, Győr, pp. 394-401.

Lendvai, László and Fekete, Imre (2021) Effect of Filament Storage Conditions on the Mechanical Properties of 3D Printed Objects Prepared with Fused Filament Fabrication. In: 12th IEEE International Conference on Cognitive Infocommunications (CogInfoCom 2021). IEEE, Online kiadás, pp. 707-710. ISBN 9781665424950; 9781665424943

Conference or Workshop Item

Fekete, Imre and Lendvai, László (2020) Toughening of various PLA grades with natural rubber for 3D printing applications. In: Engineering Symposium at Bánki 2020, Budapest.

Varga, Viktor Sándor and Lendvai, László and Mészáros, László (2016) Az attritoros őrlés poliéter-éter-keton porra gyakorolt hatása = The Effect of Attrition Milling on Poly(Ether-Ethet-Ketone) Powder. In: OGÉT 2016 - XXIV. Nemzetközi Gépészeti Találkozó, 2016.04.21-24, Déva, Románia.

Drakopoulos, Stavros and Psarras, Georgios C. and Lendvai, László and Kmetty, A. and Karger-Kocsis, J. (2014) Chemical composition and characterization of thermoplastic starch biomicrocomposites and hybrids, reinforced with latex and cellulose microparticles. In: 10th Hellenic Polymer Society Conference, 2014.12.04-06, Patras, Görögország.