REAL

Items where Subject is "Q Science / természettudomány > QC Physics / fizika > QC01 Mechanics / mechanika"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: A | B | C | D | E | F | H | I | J | K | L | M | N | O | P | R | S | T | U | V | W | Z
Number of items at this level: 127.

A

Andor, Krisztián and Polgár, Rudolf (2015) Matematikai módszerek a mechanikában. DIMENZIÓK: MATEMATIKAI KÖZLEMÉNYEK, 3. pp. 49-52. ISSN 2064-2172

Asszonyi, Csaba and Csatár, Attila and Fülöp, Tamás (2015) Szilárd anyagok rugalmas, hőtágulási, képlékeny és reológiai folyamatainak termomechanikája – elmélet és kísérlet. In: Termodinamikai módszertan - kontinuumfizikai alkalmazások. Egyesület a Tudomány és Technológia Egységéért, Budapest, pp. 35-54. ISBN 978-615-80157-0-7

B

Bachrathy, Daniel (2015) Robust Stability Limit of Delayed Dynamical Systems. PERIODICA POLYTECHNICA-MECHANICAL ENGINEERING, 59 (2). pp. 74-80. ISSN 0324-6051

Bachrathy, Daniel and Kossa, Attila and Stepan, Gabor (2015) Modeling process damping via FEM based Force-FRF. In: 4th INTERNATIONAL CONFERENCE on VIRTUAL MACHINING PROCESS TECHNOLOGY (VMPT 2015), 2015.06.02. - 2015.06.05., Vancouver, Kanada.

Barcsák, Csaba and Jármai, Károly (2012) Optimization with an improved PSO algorithm. In: microCAD 2012, I szekció: Applied Information Engineering (Alkalmazott informatika). Miskolci Egyetem Innovációs és Technológia Transzfer Centrum, Miskolc, I17. ISBN 978-963-661-773-8

Bencsik, László and Bodor, Bálint and Insperger, Tamás Antal (2017) Reconstruction of motor force during stick balancing. In: Proceedings of DSTA 2017, 2017.12.11-2017.12.14, Lodz.

Bencze, Ferenc and Koscsó, Gábor and Régert, Tamás and Tajti, Ákos and Vad, János (2007) Axiális átömlésű áramlástechnikai forgógépek korszerű tervezési módszerének kidolgozása a háromdimenziós áramlás figyelembevételével, szimulációs és kísérleti eszközök alkalmazásával = Elaboration of a novel methodology for design of axial flow turbomachinery with consideration of three-dimensional flow, with application of simulation and experimental tools. Project Report. OTKA.

Benedek, Tamás and Vad, János (2015) Case-specific Empirical Guidelines For Simultaneous Reduction Of Loss And Emitted Noise In Axial Flow Fans. In: Proceedings of Conference on Modelling Fluid Flow (CMFF'15). CFD.HU Kft., Budapest, p. 108. ISBN 978-963-313-190-9

Benedek, Tamás and Vad, János (2016) An industrial on-site methodology for combined acoustic-aerodynamic diagnostics of axial fans, involving the Phased Array Microphone technique. INTERNATIONAL JOURNAL OF AEROACOUSTICS, 15 (1-2). pp. 81-102. ISSN 1475-472X

Bereczky, Ákos and Gróf, Gyula and Gyenis, Ákos László and Könczöl, Sándor and Lezsovits, Ferenc and Sztankó, Krisztián Endre and Varga, Lajos (2011) Magas inert tartalmú és biogázok tüzelési tulajdonságainak vizsgálata = Investigation of Combustion Properties of High Inert Gases and Biogases. Project Report. OTKA.

Beregi, Sándor and Takács, Dénes and Stépán, Gábor (2016) Tyre induced vibrations of the car-trailer system. Journal of Sound and Vibration, 362. pp. 214-227. ISSN 0022-460X

Boschan, Julia and Vagberg, Daniel and Somfai, Ellák and Tighe, Brian P. (2016) Beyond linear elasticity: Jammed solids at finite shear strain and rate. Soft Matter, 12. pp. 5450-5460. ISSN 1744-683X

Bozóki, Tamás and Czelnai, Levente and Horicsányi, Attila and Nyerges, Anita and Pál, András and Pálfy, József and Vincze, Miklós (2019) Large-scale ocean circulation in the Southern Hemisphere with closed and open Drake Passage--A laboratory minimal model approach. Deep Sea Research Part II: Topical Studies in Oceanography, 160. pp. 16-24. ISSN 0967-0645

Buza, Ágnes Kinga (2015) A gyökér stabilitásának vizsgálata statikus és dinamikus dőlésméréssel, valamint a gyökérzet vizsgálatával. FAIPAR, 63 (2). pp. 15-23. ISSN 0014-6897

Béda, Péter (2010) Nem-rugalmas szilárd testek instabilitási vizsgálatának lehetséges modellezése = Possible modelling for instability investigations of inelastic solid continua. Project Report. OTKA.

Börzsönyi, Tamás and Somfai, Ellák and Szabó, Balázs and Wegner, Sandra and Mier, Pasca and Rose, Georg and Stannarius, Ralf (2016) Packing, alignment and flow of shape-anisotropic grains in a 3D silo experiment. New Journal of Physics, 18. 093017. ISSN 1367-2630

C

Challamel, Noël and Kocsis, Attila and Wang, CM (2015) Higher-Order Gradient Elasticity Models Applied to Geometrically Nonlinear Discrete Systems. THEORETICAL AND APPLIED MECHANICS, 42 (4). pp. 223-248. ISSN 1450-5584

Challamel, Noël and Kocsis, Attila and Wang, CM and Lerbet, Jean (2016) From Ziegler to Beck’s column: a nonlocal approach. Archive of Applied Mechanics, 86. pp. 1095-1118. ISSN 0939-1533

D

Darquenne, Chantal and Borojeni, Azadeh A.T. and Colebank, Mitchel J. and Forest, M. Gregory and Madas, Balázs G. and Tawhai, Merryn and Jiang, Yi (2022) Aerosol Transport Modeling: The Key Link Between Lung Infections of Individuals and Populations. Frontiers in Physiology, 13. No. 923945. ISSN 1664-042X

Daróczy, László and Jármai, Károly (2013) Topology optimization by a quasi-static fluid-based evolutionary method. In: Proceedings of the 5th International Conference "Computational Mechanics and Virtual Engineering" COMEC 2013: Transilvania University of Brasov, 24 - 25 October 2013. DERC Publishing House, Boston (MA), pp. 191-196. ISBN 978-1-939757-11-1; 978-606-19-0225-5

Dobránszky, János (2007) Az anizotrópia szerepének kutatása a polikrisztallin fémek mechanikai tulajdonságaira és ultraprecíziós forgácsolhatóságára = Investigation of the role of anisotropy on the mechanical properties of polycrystalline metals and on the UP machinablility. Project Report. OTKA.

Dobránszky, János and Mészáros, István and Nagy, Gyula (2000) Mechanical and thermal induced phase transformations in superduplex stainless steel. In: 6th World Duplex Conference and Expo. Associazione italiana di metallurgia, Milano, pp. 385-393. ISBN 9788885298378

Domokos, Gábor and Kun, Ferenc and Sipos, András Árpád and Szabó, Tímea (2015) Universality of fragment shapes. SCIENTIFIC REPORTS, 5 (9147). pp. 1-6. ISSN 2045-2322

Domokos, Gábor and Lángi, Zsolt and Sipos, András Árpád and Szabó, Tímea and Török, Ákos and Várkonyi, Péter László (2013) Merev testek statikai egyensúlya: morfológia, topológia és evolúció = Static equilibria of rigid bodies: morphology, topology and evolution. Project Report. OTKA.

E

Ecsedi, István and Baksa, Attila and Dluhi, Kornél and Kovács, Pál Zoltán and Páczelt, István (2009) Inhomogén anyagú szerkezeti elemek szilárdságtani és dinamikai vizsgálata = Dynamic and static analysis of nonhomogeneous structural components. Project Report. OTKA.

Ecsedi, István and Lengyel, Ákos József and Baksa, Attila (2021) A boundary value problem of orthotropic electroelastic circular cylinder. MULTIDISZCIPLINÁRIS TUDOMÁNYOK: A MISKOLCI EGYETEM KÖZLEMÉNYE, 11 (4). pp. 326-334. ISSN 2062-9737 (nyomtatott), 2786-1465 (online)

Ecsedy, Anna (2013) Plenus sapientia: Lippay György esztergomi érsek pozsonyi kertjének látványosságai. Művészettörténeti Értesítő, 62 (2). pp. 171-232. ISSN 0027-5247

F

Fabre, I. and Navarrete, F. and Sarkadi, L. and Barrachina, R. O. (2018) Free evolution of an incoherent mixture of states: a quantum mechanical approach to the van Cittert–Zernike theorem. EUROPEAN JOURNAL OF PHYSICS, 39 (1). pp. 1-11. ISSN 0143-0807

Farkas, József and Jármai, Károly (2013) Minimum cost design of a rectangular box column composed from cellular plates with welded T-stiffeners. In: Design, Fabrication and Economy of Metal Structures. Springer, Berlin; Heidelberg, pp. 29-36. ISBN 978-3-642-36690-1

Fehér, Eszter and Sipos, András Árpád (2017) Wrinkling patterns of thin films under finite membrane strain. In: ENOC 2017 - 9th European Nonlinear Dynamics Conference, 2017.06.25-30, Budapest, Magyarország.

Fekete, Balázs and Kasi, Josef and Jandova, Dagmar and Jóni, Bertalan and Trampus, Péter and Misják, Fanni (2015) Low cycle thermomechanical fatigue of reactor steels. MATERIALS SCIENCE AND ENGINEERING A Publication of the University of Miskolc, 640. pp. 357-374. ISSN 2063-6792

Fülöp, T. (2012) Egytengelyű eredő reológia, és relaxáció mint deviatorikus kúszás. In: A képlékenység termodinamikájáról. Mérnökgeológia és Kőzetmechanika Kiskönyvtár, 13 . Hungarian Printing House, Budapest, pp. 23-29. ISBN ISBN 978-963-08-3072-0

Fülöp, Tamás and Szücs, Mátyás (2015) Szilárdtest-reológiai időfüggés meghatározása a Volterra-elv által inspirálva. In: Termodinamikai módszertan - kontinuumfizikai alkalmazások. Egyesület a Tudomány és Technológia Egységéért, Budapest, pp. 67-76. ISBN 978-615-80157-0-7

Fülöp, Tamás and Ván, Péter (2010) Véges rugalmas és képlékeny deformációk leírása. In: Idő és térderiváltak anyagtörvényekben. Mérnökgeológia-Kőzetmechanika Kiskönyvtár, Mérnök (10). Műegyetemi Kiadó, Budapest, pp. 99-151. ISBN 978-963-420-992-8

H

Hajdu, Dávid and Insperger, Tamás Antal (2014) Demonstration of the sensitivity of the Smith predictor to parameter uncertainties using stability diagrams. INTERNATIONAL JOURNAL OF DYNAMICS AND CONTROL. pp. 1-9. ISSN 2195-268X

Hegedűs, Ferenc (2016) Topological analysis of the periodic structures in a harmonically driven bubble oscillator near Blake's critical threshold: Infinite sequence of two-sided Farey ordering trees. PHYSICS LETTERS A, 380 (9-10). pp. 1012-1022. ISSN 0375-9601

Hegedűs, Ferenc and Lauterborn, Werner and Parlitz, Ulrich and Mettin, Robert (2017) Interaction of period-1 orbits in a dual-frequency driven asymmetric nonlinear oscillator. In: Proceedings of the 9th European Nonlinear Dynamics Conference. Budapest University of Technology and Economics, Budapest, p. 212. ISBN 978-963-12-9168-1

Hegyi, Dezső and Halász, Marianna and Molnár, Kolos and Szebényi, Gábor and Sipos, András Árpád (2016) An elastic phenomenological material law for textile composites and it's fitting to experimental data. Mechanics of Materials. pp. 1-14. ISSN 0167-6636, ESSN: 1872-7743 (Submitted)

Hollósi, Anna and Pászty, Katalin and Kellermayer, Miklós and Charras, Guillaume and Varga, Andrea (2021) BRAF Modulates Stretch-Induced Intercellular Gap Formation through Localized Actin Reorganization. INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES, 22 (16). No. 8989. ISSN 1661-6596

I

Insperger, Tamás Antal and Milton, John and Stépán, Gábor (2015) Semi-discretization and the time-delayed PDA feedback control of human balance. In: 12th IFAC Workshop on Time Delay Systems, 2015.06.28-2015.06.30, Ann Arbor.

J

Juhász, Zoltán and Szekrényes, András (2015) Progressive buckling of a simply supported delaminated orthotropic rectangular composite plate. International Journal of Solids and Structures, 69-70. pp. 217-229. ISSN 0020-7683

Jármai, Károly (2012) Structural optimization for cost. In: 4th International Conference on Advanced Composite Materials in Engineering & 2nd International Conference Research and Innovation in Engineering COMAT 2012. Lux Libris, Brasov, pp. 308-313. ISBN 978-973-131-162-3

Jármai, Károly and Farkas, József (2015) Gyengén kúpos bordázott héj optimális méretezése külső nyomás esetén költségminimumra. In: XII. Magyar Mechanikai Konferencia. Miskolci Egyetem Gépészmérnöki és Informatikai Kar Műszaki Mechanikai Intézet, Miskolc, p. 338. ISBN 978-615-5216-74-9

K

Kalmár-Nagy, Tamás and Bak, Bendegúz Dezső and Benedek, Tamás and Vad, János (2015) Vibration and Noise of an Axial Flow Fan. PERIODICA POLYTECHNICA-MECHANICAL ENGINEERING, 59 (3). pp. 109-113. ISSN 0324-6051

Kalácska, Gábor and Zsidai, László and Keresztes, Róbert and Tóth, András and Mohai, Miklós and Szépvölgyi, János (2012) Effect of nitrogen plasma immersion ion implantation of polyamide-6 on its sliding properties against steel surface. Wear, 290-91. pp. 66-73. ISSN 0043-1648

Kereszturi, Klára and Tóth, András and Mohai, Miklós and Bertóti, Imre and Szépvölgyi, János (2010) Nitrogen plasma-based ion implantation of poly(tetrafluoroethylene): effect of the main parameters on the surface properties. Applied Surface Science, 256. pp. 6385-6389. ISSN 0169-4332

Khmurovska, Yuliia and Stemberk, Petr and Fekete, Tamás (2018) Mechanical response of biological shielding ring to variations in azimuthal neutron flux distribution. In: 23rd International Conference "Mechanika-2018", 2018. május 18., Kaunas, Lithuania.

Kiss, László Péter (2013) Heterogén anyagú síkgörbe rúd szabadrezgéseinek sajátfrekvenciái. GÉP, 64 (5). pp. 16-21. ISSN 0016-8572

Kiss, László Péter and Szeidl, György (2013) Tetőpontjában sugárirányú koncentrált erővel terhelt heterogén anyagú síkgörbe rúd rezgései. MULTIDISZCIPLINÁRIS TUDOMÁNYOK: A MISKOLCI EGYETEM KÖZLEMÉNYE, 3 (1-2). pp. 67-82. ISSN 2062-9737

Klapcsik, Kálmán and Hegedűs, Ferenc (2017) The effect of high viscosity on the evolution of the bifurcation set of a periodically excited gas bubble. CHAOS SOLITONS & FRACTALS, 104. pp. 198-208. ISSN 0960-0779

Kleb, Béla and Vásárhelyi, Balázs (2003) Test results and empirical formulas of rock mechanical parameters of rhiolitic tuff samples from Eger’s cellars. ACTA GEOLOGICA HUNGARICA, 46 (3). pp. 301-312. ISSN 0236-5278

Kocsis, Attila and Challamel, Noël (2016) On the post-buckling of distributed microstructured system: The finite element elastica. International Journal of Mechanical Sciences, 114. pp. 12-20. ISSN 0020-7403

Kocsis, Attila and Challamel, Noël and Károlyi, György (2017) Discrete and nonlocal models of Engesser and Haringx elastica. International Journal of Mechanical Sciences, 130. pp. 571-585. ISSN 0020-7403

Kovács, Tamás (2019) Gyűrűrendszerek dinamikája kiterjedt égitestek körül. FIZIKAI SZEMLE. ISSN 0015-3257 (In Press)

Krállics, György and Détári, Péter and Dobránszky, János and Gubicza, Jeno and Gueorgy, Raab and Igor, Alexandrov and Igor, Budilov and Mészáros, István and Németh, Árpád and Palotás, Béla and Ruslan, Valiev and Seppo, Kivivuori and Szabadíts, Ödön and Timo, Saarinen and Törköly, Tamás (2008) Nagymértékű képlékeny alakítással előállított ultrafinom szemcséjű anyagok mikroszerkezetének és makroszkopikus tulajdonságainak kapcsolata = Relationship between microstructure and macroscopic properties of ultra-fine grained materials made by severe plastic deformation. Project Report. OTKA.

Krähling, Péter and Steyer, Joshua and Parlitz, Ulrich and Hegedűs, Ferenc (2023) Attractor selection in nonlinear oscillators by temporary dual-frequency driving. NONLINEAR DYNAMICS. ISSN 0924-090X

Kurutzné dr. Kovács, Márta and Barsi, Árpád and Fornet, Béla and Gálos, Miklós and Hoffer, Zoltán and Kirchner, István and Kiss, Rita and Pezer, Ferenc and Szirtes, Balázs and Tornyos, Árpád (2009) A lumbális gerinc kísérleti és numerikus biomechanikai vizsgálata = Experimental and numerical biomechanical analysis of lumbar spine. Project Report. OTKA.

L

Laczák, Lili Eszter and Károlyi, György (2017) On the impact of a rigid–plastic missile into rigid or elastic target. INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS, 91. pp. 1-7. ISSN 0020-7462

Lehotzky, Dávid and Insperger, Tamás Antal and Stépán, Gábor (2015) Szán szabályozásának hatása az esztergálás regeneratív rezgéseire. In: XII. Magyar Mechanikai Konferencia, 2015.08.25-27., Miskolc, Hungary. (Unpublished)

Lehotzky, Dávid and Turi, János and Insperger, Tamás Antal (2014) Stabilizability diagram for turning processes subjected to digital PD control. INTERNATIONAL JOURNAL OF DYNAMICS AND CONTROL, 2 (1). pp. 46-54. ISSN 2195-268X

Lenkei, Péter and Csébfalvi, Anikó and Orbán, Zoltán and Orbán, József and Törös, Endre (2009) Számítási modellek és diagnosztikai eljárások fejlesztése műemlék jellegű, falazott hídszerkezetek teherbírásának megállapítására és használhatósági követelményeinek ellenőrzésére. = Development of mechanical models and diagnosis procedures for the assessment of the load carrying capacity and serviceability of historical masonry bridges. Project Report. OTKA.

Lugosi, Lilla and Kovács, Tamás (2020) Diffusion and escape times in the open-leaky standard map. PHYSICAL REVIEW E - STATISTICAL, NONLINEAR AND SOFT MATTER PHYSICS. ISSN 1539-3755 (In Press)

Lógó, János and Kaliszky, Sándor and Pomezanski, Vanda and Rozványi, György Iván and Vásárhelyiné dr. Szabó, Anna (2011) Új elméleti és numerikus módszerek tartószerkezetek topológia optimálására determinisztikus és stochasztikus feladatok esetén = New theoretical and numerical methods of topology optimization of structures in case of deterministic and stochastic problems. Project Report. OTKA.

M

Marosné dr. Berkes, Mária and Babcsánné Kiss, Judit and Czél, György and Kocsisné dr. Baán, Mária and Koncz, János and Maros, Zsolt and Rózsahegyi, Péter (2009) Si3N4 alapú kerámiák tribológiai és törési viselkedésének vizsgálata és modellezése = Investigation and Modelling of Tribological and Fracture Behavior of Si3N4 based ceramics. Project Report. OTKA.

Medjdoub, Karim and Jánosi, Imre M. and Vincze, Miklós (2020) Laboratory investigations on the resonant feature of ‘dead water’ phenomenon. Experiments in Fluids, 61 (6). ISSN 0723-4864

Milton, John and Insperger, Tamás Antal and Stépán, Gábor (2015) Human balance control: Dead zones, intermittency and micro-chaos. In: Mathematical approaches to biological systems: Networks, oscillations and collective phenomena. Springer, New York, pp. 1-28. ISBN 978-4-431-55444-8

Milton, John and Stépán, Gábor and Insperger, Tamás Antal (2015) Sensory dead zones and time delays in neural feedback control. In: 17th Yale Workshop on Adpative and Learning Systems, 2014.06.24-2014.06.26, New Haven.

Molnár, Tamás Gábor and Insperger, Tamás Antal (2014) On the robust stabilizability of unstable systems with feedback delay by finite spectrum assignment. JOURNAL OF VIBRATION AND CONTROL. pp. 1-22. ISSN 1077-5463

N

Nagy, Attila and Horváth, Alpár and Farkas, Árpád and Füri, Péter and Erdélyi, Tamás and Madas, Balázs G. and Czitrovszky, Aladár and Merkely, Béla and Szabó, Attila and Ungvári, Zoltán and Müller, Veronika (2022) Modeling of nursing care-associated airborne transmission of SARS-CoV-2 in a real-world hospital setting. GeroScience, 44 (2). pp. 585-595. ISSN 2509-2715

Nagy, Balázs and Balla, Esztella Éva (2017) Szárnymetszetek körüli áramlás szimulációja alacsony Reynolds-számokon. In: Tavaszi Szél = Spring Wind 2017 [tanulmánykötet] 3. Doktoranduszok Országos Szövetsége, Budapest, pp. 90-101. ISBN 978-615-5586-18-7

Nagy, Dalma and Bencsik, László and Insperger, Tamás Antal (2017) Identification of the model of stick balancing using the cepstral analysis. In: Proceedings of DSTA 2017. Lodz University of Technology, Lodz, pp. 405-412.

Nagy, Tibor and Vikár, Anna and Lendvay, György (2018) A general formulation of the quasiclassical trajectory method for reduced-dimensionality reaction dynamics calculations. Physical Chemistry Chemical Physics, 20 (19). pp. 13224-13240. ISSN 1463-9076

Nyőgér, Zoltán and Szakály, Norbert and Molnár, Csenge Andrea and Várnagy, Anna and Terebessy, Tamás and Gunther, Tibor and Skaliczki, Gábor (2023) Scapuladyskinesis közepes méretű, teljes vastagságú supraspinatusizom-szakadások esetén = Scapula dyskinesis in medium size full-thickness supraspinatus muscle tears. ORVOSI HETILAP, 164 (31). pp. 1213-1221. ISSN 0030-6002

O

Orbulov, Imre Norbert and Németh, Árpád and Dobránszky, János (2008) Composite production by pressure infiltration. MATERIALS SCIENCE FORUM, 589. pp. 137-142. ISSN 0255-5476

Oroszlány, László and Dóra, Balázs and Cserti, József and Cortijo, Alberto (2018) Topological and trivial magnetic oscillations in nodal loop semimetals. PHYSICAL REVIEW B, 97 (20). pp. 1-5. ISSN 2469-9950

P

Palágyi, Menyhért (2017) Kopernikusz és a relativitás elmélete. A német eredetiből fordította és magyarázó jegyzetekkel, kommentárokkal ellátta: Székely László. In: Észlelés és fantázia: Válogatás Palágyi Menyhért írásaiból. Gondolat Kiadó. ISBN 978-963-693-794-2 (In Press)

R

Rucz, Péter and Ulveczki, Mihály Ádám (2021) A coupled 3D finite element model of the sound production by mallet percussion instruments. In: ICSV27 - The 27th International Congress on Sound and Vibration, 2021. július 11-16., Prague, Czech Republic.

S

Sipos, András Árpád (2013) Statisztikai próbák sztochasztikus, közel izotróp tenzorral leírható kőzetfizikai mennyiségek vizsgálatára. Statistical tests for rock physical parameters given by near isotropic, stochastic tensors. Magyar Geofizika, 54 (4). pp. 170-184. ISSN 0025-0120

Sipos, András Árpád (2015) Útkövető eljárás variációs megközelítésű károsodási modellek szimulációjához. In: XII. MAMEK, 2015.08.25-27., Miskolci Egyetem.

Sipos, András Árpád and Fehér, Eszter (2016) Disappearance of stretch-induced wrinkles of thin sheets: a study of orthotropic films. International Journal of Solids and Structures, 97-98. pp. 275-283. ISSN 0020-7683

Stépán, Gábor and Milton, J. G. and Insperger, Tamás Antal (2017) Quantization improves stabilization of dynamical systems with delayed feedback. CHAOS, 27 (11). pp. 1-9. ISSN 1054-1500

Szabó, Balázs and Török, János and Somfai, Ellák and Wegner, Sandra and Stannarius, Ralf and Böse, Axel and Rose, Georg and Angenstein, Frank and Börzsönyi, Tamás (2014) Evolution of shear zones in granular materials. PHYSICAL REVIEW E - STATISTICAL, NONLINEAR AND SOFT MATTER PHYSICS, 90. 032205. ISSN 1539-3755

Szabó, László and Kaszanitzky, Mátyás and Ladányi, Gábor (2007) Véges rugalmas-képlékeny alakváltozás elméleti és numerikus vizsgálata = Theoretical and numerical investigation of finite elasto-plastic deformation. Project Report. OTKA.

Szabó, Tamás (2020) Ostorcsapás hullámterjedésének lineáris és nemlineáris számításai. MULTIDISZCIPLINÁRIS TUDOMÁNYOK: A MISKOLCI EGYETEM KÖZLEMÉNYE, 10 (3). pp. 307-314. ISSN 2062-9737 (nyomtatott), 2786-1465 (online)

Szeidl, György and Kozák, Imre and Szabó, Tamás and Szirbik, Sándor Mátyás (2008) Végeselem és peremelem módszerek különös tekintettel a nemlineáris héjelméletre és a rugalmasságtan duál rendszerére = Finite element and boundary element methods with a special regard to the nonlinear theory of shells and the dual system of elasticity. Project Report. OTKA.

Szekrényes, András (2010) Az MMB törési teszt alkalmazása hosszú repedések esetén = Application of the MMB fracture test with long crack lengths. GÉP, 61 (11). pp. 45-48. ISSN 0016-8572

Szekrényes, András (2003) Beam and Finite Element Models for Fiber-Bridgings in Unidirectional DCB Specimens. In: microCAD 2003, International Scientific Conference, 2003.03.06-2003.03.07, Miskolc, Miskolci Egyetem.

Szekrényes, András (2010) Comparison of the mixed-mode bending and the prestressed end-notched flexure systems. In: Gépészet 2010: Proceedings of the Seventh Conference on Mechanical Engineering, 2010.05.25-2010.05.26, Budapest,BME.

Szekrényes, András (2010) Crack stability of fracture specimens used to test unidirectional fiber reinforced material. Experimental Mechanics, 50 (4). pp. 473-482. ISSN 0014-4851

Szekrényes, András (2008) Experiment-based criterion for the crack stability analysis in composite materials. In: Gépészet 2008: Proceedings of Sixth Conference on Mechanical Engineering, 2008.05.29-2008.05.30, Budapest, BME.

Szekrényes, András (2006) An Experimental Study to Determine the Mixed-mode II/III Delamination Fracture Criterion of Composite Materials. In: Gépészet 2006: Proceedings of the Fifth Conference on Mechanical Engineering, 2006.05.25-2006.05.26, Budapest, BME.

Szekrényes, András (2002) Finite Element Analysis of a Layered Cylinder Using the Connection between the Macro- and Microstructure. In: Gépészet 2002: Proceedings of the Third Conference on Mechanical Engineering, 2002.05.30-2002.05.31, Budapest, BME.

Szekrényes, András (2009) Improved analysis of the modified split-cantilever beam for mode-III fracture. International Journal of Mechanical Sciences, 51 (9-10). pp. 682-693. ISSN 0020-7403

Szekrényes, András (2013) Interface crack between isotropic Kirchhoff plates. Meccanica, 48 (3). pp. 507-526. ISSN 0025-6455

Szekrényes, András (2012) Interface crack in orthotropic Kirchhoff plates. In: Gépészet 2012. Proceedings of the 8th Conference on Mechanical Engineering, 2012 május 24-25., Budapest.

Szekrényes, András (2011) Interlaminar fracture analysis in the GI – GII – GIII space using prestressed transparent composite beams. Journal of Reinforced Plastics and Composites, 30 (19). pp. 1655-1669. ISSN 0731-6844

Szekrényes, András (2009) Interlaminar fracture analysis in the GI-GIII plane using prestressed transparent composite beams. Composites Part A: Applied Science and Manufacturing, 40 (10). pp. 1621-1631. ISSN 1359-835X

Szekrényes, András (2012) Interlaminar fracture analysis in the GII–GIII plane using prestressed transparent composite beams. Composites Part A: Applied Science and Manufacturing, 43 (1). pp. 95-103. ISSN 1359-835X

Szekrényes, András (2010) Prestressed composite specimen for mixed-mode I/II cracking in laminated materials. Journal of Reinforced Plastics and Composites, 29 (22). pp. 3309-3321. ISSN 0731-6844

Szekrényes, András (2005) Repedésterjedés és rétegközi szilárdság analitikus és kísérleti vizsgálata párhuzamos elcsúszás esetén. GÉP, 56 (2-3). pp. 118-125. ISSN 0016-8572

Szekrényes, András (2011) The influence of crack length and delamination width on the mode-III energy release rate of laminated composites. Journal of Composite Materials, 45 (3). pp. 279-294. ISSN 0021-9983

Szekrényes, András and Uj, József (2004) Application of Elastic Foundation Beams in Composite Fracture Mechanics - Analysis of the ELS Specimen. In: Gépészet 2004: Proceedings of the Fourth Conference on Mechanical Engineering, 2004.05.27-2004.05.28, Budapest, BME.

Szekrényes, András and Uj, József (2005) Rétegközi szilárdság vizsgálata ELS típusú üveg/poliészter próbatesteken. Műanyag és Gumi, 42 (5). pp. 195-200. ISSN 0027-2914

T

Tian, Qiaoyu and Takács, Erzsébet and Krakovský, I and Horváth, Zsolt Endre and Rosta, László and Almásy, László (2015) Study on the Microstructure of Polyester Polyurethane Irradiated in Air and Water. POLYMERS, 7. pp. 1755-1766.

Tél, Tamás and Vincze, Miklós and Jánosi, Imre (2020) Vortices capturing matter: a classroom demonstration. Physics Education, 55.

Tóth, András and Kereszturi, Klára and Mohai, Miklós and Bertóti, Imre (2010) Plasma based ion implantation of engineering polymers. Surface and Coatings Technology (204). pp. 2898-2908. ISSN ISSN: 0257-8972

U

Ulveczki, Mihály Ádám and Rucz, Péter (2020) Coupled vibroacoustic finite element model of the sound production of the xylophone. In: DAGA 2020 - 46. Jahrestagung für Akustik, Hannover, Germany.

V

Vad, János and Bencze, Ferenc and Istók, Balázs and Szente, Viktor (2007) Szabályzott pneumatikus rendszerek dinamikai vizsgálata = Dynamic Investigation on Controlled Pneumatic Systems. Project Report. OTKA.

Vad, János and Halász, Gábor and Benedek, Tamás (2015) Efficiency gain of low-speed axial flow rotors due to forward sweep. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 229 (1). pp. 16-23. ISSN 0957-6509

Varga, Béla and Domokos, Réka Anita and Fazakas, Csilla and Wilhelm, Imola and Krizbai, István A. and Szegletes, Zsolt and Gergely, Csilla and Váró, György and Végh, Attila Gergely (2017) De-adhesion dynamics of melanoma cells from brain endothelial layer. BIOCHIMICA ET BIOPHYSICA ACTA-GENERAL SUBJECTS. ISSN 0304-4165 (In Press)

Varga, Béla and Fazakas, Csilla and Wilhelm, Imola Mária and Krizbai, István Adorján and Szegletes, Zsolt and Váró, György and Végh, Attila Gergely (2016) Elasto-mechanical properties of living cells. Biochemistry and Biophysics Reports, 7. pp. 303-308.

Varga, Roxána and Hegedűs, Ferenc (2016) Periodikusan gerjesztett gázbuborék bifurkációs struktúrája. In: OGÉT 2016, 2016.04.21-2016.04.24, Déva.

Ván, Péter (2010) A harmadfokú, véges deformációs rugalmasságtan termodinamikai konzisztenciájáról. In: Idő és térderiváltak anyagtörvényekben. Mérnökgeológia-Kőzetmechanika Kiskönyvtár, Mérnök (10). Műegyetemi Kiadó, Budapest, pp. 69-83. ISBN 978-963-420-992-8

Ván, Péter (2010) A képlékenység termodinamikája. In: Idő és térderiváltak anyagtörvényekben. Mérnökgeológia-Kőzetmechanika Kiskönyvtár, Mérnök (10). Műegyetemi Kiadó, Budapest, pp. 15-50. ISBN 978-963-420-992-8

Ván, Péter (2015) Galilei-relativisztikus folyadékmechanika. In: Termodinamikai módszertan - kontinuumfizikai alkalmazások. Egyesület a Tudomány és Technológia Egységéért, Budapest, pp. 137-176. ISBN 978-615-80157-0-7

Ván, Péter (2013) Nemegyensúlyi termomechanika. n. a. (Unpublished)

Ván, Péter and Matolcsi, Tamás and Verhás, József (2009) Gyengén nemlokális mechanika = Weakly nonlocal mechanics. Project Report. OTKA.

Ván, Péter and Vásárhelyi, Balázs (2010) A kőzettestek minőségi jellemzésének és károsodottságának viszonyáról. In: Idő és térderiváltak anyagtörvényekben. Mérnökgeológia-Kőzetmechanika Kiskönyvtár, Mérnök (10). Műegyetemi Kiadó, Budapest, pp. 85-98. ISBN 978-963-420-992-8

Várszegi, Balázs and Takács, Dénes and Stépán, Gábor (2017) Stability of Damped Skateboards under Human Control. JOURNAL OF COMPUTATIONAL AND NONLINEAR DYNAMICS, 12 (5). 051014. ISSN 1555-1415

Vásárhelyi, Balázs (2002) Influence of the water saturation for the strength of volcanic tuffs. In: Workshop on volcanic rocks, 2002.11.26-2002.11.28., Lisszabon, Portugália.

Vásárhelyi, Balázs (2006) Review article: Analyzing the crack coalescence in brittle rock material. ACTA GEODAETICA ET GEOPHYSICA HUNGARICA, 41 (2). pp. 181-198. ISSN 1217-8977

Vásárhelyi, Balázs (1999) Shear failure in rock using different constant normal load. PERIODICA POLYTECHNICA-CIVIL ENGINEERING, 43 (2). pp. 179-186. ISSN 0553-6626

W

Wegner, Sandra and Stannarius, Ralf and Boese, Axel and Rose, Georg and Szabó, Balázs and Somfai, Ellák and Börzsönyi, Tamás (2014) Effects of grain shape on packing and dilatancy of sheared granular materials. Soft Matter, 10 (28). p. 5157. ISSN 1744-683X

Wortel, Geert and Börzsönyi, Tamás and Somfai, Ellák and Wegner, Sandra and Szabó, Balázs and Stannarius, Ralf and van Hecke, Martin (2015) Heaping, secondary flows and broken symmetry in flows of elongated granular particles. Soft Matter, 11. pp. 2570-2576. ISSN 1744-683X

Z

Zatarain, M. and Alvarez, J. and Bediaga, I. and Munoa J, J. and Dombóvári, Zoltán (2015) Implicit subspace iteration as an efficient method to compute milling stability lobe diagrams. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 77 (1-4). pp. 597-607. ISSN 0268-3768

Zelei, Ambrus and Nagy, Dalma and A. Molnár, Csenge and Bencsik, László and Insperger, Tamás Antal (2017) Experimental Identification of Time-Delay of Human Balancing Using Cepstrum. In: ECCOMAS Thematic Conference on MULTIBODY DYNAMICS. Czech Technical University in Prague, Prága, pp. 339-341.

Závodszky, Gábor and Károlyi, György and Paál, György (2015) Emerging fractal patterns in a real 3D cerebral aneurysm. JOURNAL OF THEORETICAL BIOLOGY, 368. pp. 95-101. ISSN 0022-5193

This list was generated on Tue Mar 19 11:44:17 2024 CET.