Items where Subject is "T Technology / alkalmazott, műszaki tudományok > T2 Technology (General) / műszaki tudományok általában"

B

Baji, Zsófia and Lábadi, Zoltán and Molnár, György and Pécz, Béla and Tóth, Attila Lajos and Tóth, József and Csik, Attila and Bársony, István (2013) Post-selenization of stacked precursor layers for CIGS. Vacuum, 92. pp. 44-51. ISSN 0042-207X (In Press)

Balázsi, Csaba and Gergely, Gréta and Balázsi, Katalin and CHAE, Chang-Hoon and SIM, Hye-Young and CHOI, Je-Yong and KIM, Seong-Gon (2013) Bone formation with nano-hydroxyapatite from eggshell. Materials Science Forum, 729. pp. 25-30. ISSN 0255-5476

Balázsi, Csaba and Tapasztó, Orsolya and Károly, Zoltán and Kun, Péter and Balázsi, Katalin and Szépvölgyi, János (2013) Structural and mechanical properties of milled Si3N4/cnts composites by spark plasma sintering method. Materials Science Forum, 729. pp. 31-36. ISSN 0255-5476

Balázsi, Katalin and Vandrovcová, Marta and Bačáková, Lucie and Balázsi, Csaba (2013) Structural and biocompatible characterization of TiC/a:C nanocomposite thin films. MATERIALS SCIENCE AND ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS, 33 (3). pp. 1671-1675. ISSN 0928-4931

Balázsi, Katalin and Vandrovcová, Marta and Bačáková, Lucie and Balázsi, Csaba and Bertóti, Imre and Davin, François and Radnóczi, György (2013) Mechanical behavior of bioactive TiC nanocomposite thin films. Materials Science Forum, 729. pp. 296-301. ISSN 0255-5476

Bera, József and Pokorádi, László (2008) Noise Effect of Building Installation. In: Conferenţia cu participare internaţională, 2008.04.17-2008.04.18., Temesvár, Románia.

Bertóti, Edgár (2010) Feszültségmezőre épülő magasabb rendű végeselem-modellek a szilárd testek mechanikájában = Stress-based higher-order finite element models in computational solid mechanics. Project Report. OTKA.

Bognár, Eszter and Ring, György and Albrecht, Katalin and Dobránszky, János and Ginsztler, János (2006) Haemocompatible Coatings of Coronary Stents. Advances in Science and Technology, 49. pp. 85-90. ISSN 1662-0356

Bognár, Eszter and Ring, György and Marton, Hilda Zsanett and Dobránszky, János and Ginsztler, János (2007) Polyurethane Coating on Coronary Stents. Key Engineering Materials, 345-46. pp. 1269-1272. ISSN 1013-9826

Borsa, Judit and Kiss, Katalin and Nagy, Veronika and Nagyné László, Krisztina and Pátzay, György and Rácz, Ilona and Reicher, Johanna and Sallay, Péter and Tóth, Tünde and Vass, György and Weiser, László and Zala, Judit (2010) Cellulóz alapú szálasanyagok módosítása alkalmazási lehetőségeik bővítése céljából = Modification of cellulosic fibers for extension of their application. Project Report. OTKA.

Bosi, Matteo and Attolini, Giovanni and Pécz, Béla and Zolnai, Zsolt and Dobos, László and Martínez, Oscar and Jiang, Liudi and Taysir, Salim (2013) Structural characterization of 3C-SiC grown using methyltrichlorosilane. Materials Science Forum, 740-74. pp. 291-294. ISSN 0255-5476

Buzás, Norbert and Vilmányi, Márton (2006) A technológia transzfer intézményi megújulása a tudásgazdaságban = Technology transfer in the knowledge-based economy: organizational changes. Project Report. OTKA.

Bárány, Tamás (2010) Környezetbarát, önerősítéses polimer kompozit szerkezeti anyag kifejlesztése = Development of environmental friendly, self-reinforced polymer composite. Project Report. OTKA.

C

Chaudhuri, I. and Sertl, S. and Hajnal, Zoltán and Dellnitz, M. and Frauenheim, Th. (2004) Global optimization of silicon nanoclusters. Applied Surface Science, 226 (1-3). pp. 108-113. ISSN 0169-4332

Csermely, Jeno and Bellus, Zoltán and Fenyvesi, László and Herdovics, Mihály and Komka, Gyula (2007) Szárítástechnikai jellemzők befolyása a szemestermények fizikai-mechanikai tulajdonságaira = Influence of drying-technical characteristics on physical-mechanical properties of cereals. Project Report. OTKA.

D

Deák, P. and Gali, Ádám and Knaup, J. and Hajnal, Zoltán and Frauenheim, Th. and Ordejón, P. and Choyke, J.W. (2003) Defects of the SiC/SiO2 interface: energetics of the elementary steps of the oxidation reaction. Physica B: Condensed Matter, 340-42. pp. 1069-1073. ISSN 0921-4526

Deák, Péter and Hajnal, Zoltán and Miró, József (1996) Recombination with larger than bandgap energy at centres on the surface of silicon microstructures. Thin Solid Films, 276 (1-2). pp. 290-292. ISSN 0040-6090

Deák, Péter and Hajnal, Zoltán and Stutzmann, Martin and Fuchs, Heinz D. (1995) Correlation between the luminescence and Raman peaks in quantum-confined systems. Thin Solid Films, 255 (1-2). pp. 241-245. ISSN 0040-6090

Dobránszky, János and Ginsztler, János (2007) Microstructural Stability of Duplex Stainless Steel Weldments. Materials Science Forum, 561-65. pp. 2119-2122. ISSN 0255-5476

Dózsa, László and Molnár, György and Zolnai, Zsolt and Dobos, László and Pécz, Béla and Galkin, N.G. and Dotsenko, S.A. and Bezbabny, D.A. and Fomin, D.V. (2013) Formation and characterization of semiconductor Ca2Si layers prepared on p-type silicon covered by an amorphous silicon cap. JOURNAL OF MATERIALS SCIENCE, 48. pp. 2872-2882. ISSN 0022-2461

E

Elek, István (1990) Fast Porosity Estimation by Principal Component Analysis. Geobyte. pp. 21-30. ISSN 0885-6362

Elek, István (1988) Some Applications of Principal Component Analysis: well to well correlation, zonation. Geobyte. pp. 46-53. ISSN 0885-6362

Emőd, István and Füle, Miklós and Tánczos, Katalin and Zöldy, Máté (2005) A bioetanol magyarországi bevezetésének műszaki, gazdasági és környezetvédelmi feltételei. MAGYAR TUDOMÁNY, 50. pp. 278-286. ISSN 0025-0325

F

Faludi, Gábor and Hári, József and Renner, Károly and Móczó, János and Pukánszky, Béla (2013) Fiber association and network formation in PLA/lignocellulosic fiber composites. Composites Science and Technology, 77. pp. 67-73. ISSN 0266-3538

Fekete, Zoltán and Hajnal, Zoltán and Márton, G. and Fürjes, Péter and Pongrácz, Anita (2013) Fracture analysis of silicon microprobes designed for deep-brain stimulation. MICROELECTRONIC ENGINEERING, 103. pp. 160-166. ISSN 0167-9317

Fekete, Zoltán and Pongrácz, Anita and Márton, Gergely and Fürjes, Péter (2013) On the fabrication parameters of buried microchannels integrated in in-plane silicon microprobes. MATERIALS SCIENCE FORUM, 729. pp. 210-215. ISSN 0255-5476

Fodor, Balázs and Kollár, István (2008) ADC Testing With Verification. IEEE Transactions on Instrumentation and Measurement, 57 (12). pp. 2762-2768. ISSN 0018-9456

Frauenheim, Thomas and Seifert, Gotthard and Elstner, Marcus and Niehaus, Thomas and Köhler, Christof and Amkreutz, Marc and Sternberg, Michael and Hajnal, Zoltán and Carlo, Aldo Di and Suhai, Sándor (2002) Atomistic simulations of complex materials: ground-state and excited-state properties. Journal of Physics: Condensed Matter, 14 (11). pp. 3015-3047. ISSN 0953-8984

Fülöp, T. (2012) Egytengelyű eredő reológia, és relaxáció mint deviatorikus kúszás. In: A képlékenység termodinamikájáról. Mérnökgeológia és Kőzetmechanika Kiskönyvtár, 13 . Hungarian Printing House, Budapest, pp. 23-29. ISBN ISBN 978-963-08-3072-0

G

Gali, Ádám and Heringer, D. and Deák, P. and Hajnal, Zoltán and Frauenheim, Th. and Devaty, R. and Choyke, W. (2002) Isolated oxygen defects in 3C- and 4H-SiC: A theoretical study. Physical Review B (Condensed Matter and Materials Physics), 66 (12). No. 125208. ISSN 1098-0121

Gergely, Gréta and Molnár, Alíz and Gácsi, Zoltán (2013) Examination of Pb free soldier joints. Materials Science Forum, 752. pp. 42-47. ISSN 0255-5476

Gubicza, Jenő and Arató, Péter and Wéber, Ferenc (1999) Oxidation-induced changes in mechanical properties of silicon nitride ceramics. In: Ceramics: getting into the 2000's: Proceedings of the World Ceramics Congress, part of the 9th CIMTEC-World Ceramics Congress and Forum on New Materials. Techna, Faenza, pp. 743-751.

Gubicza, Jenő and Chinh, Nguyen Quang and Csanádi, T. and Langdon, T. G. and Ungár, Tamás (2007) Microstructure and strength of severely deformed fcc metals. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCURE AND PROCESSING, 462 (1-2). pp. 86-90. ISSN 0921-5093

Gubicza, Jenő and Chinh, Nguyen Quang and Lábár, János and Hegedűs, Zoltán and Szommer, Péter and Tichy, Géza and Langdon, Terence G. (2008) Delayed microstructural recovery in silver processed by equal-channel angular pressing. JOURNAL OF MATERIALS SCIENCE, 43 (16). pp. 5672-5676. ISSN 0022-2461 (print), 1573-4803 (online)

Gubicza, Jenő and Chinh, Nguyen Quang and Szommer, P. and Vinogradov, A. and Langdon, T. G. (2007) Microstructural characteristics of pure gold processed by equal-channel angular pressing. Scripta Materialia, 56 (11). pp. 947-950. ISSN 1359-6462

Gubicza, Jenő and Dirras, G. and Szommer, Péter and Bacroix, B. (2007) Microstructure and yield strength of ultrafine grained aluminum processed by hot isostatic pressing. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCURE AND PROCESSING, 458 (1-2). pp. 385-390. ISSN 0921-5093

Gubicza, Jenő and Fogarassy, Zsolt and Krállics, Gy. and Lábár, János and Törköly, T. (2008) Microstructure and mechanical behavior of ultrafine-grained titanium. Materials Science Forum, 589. pp. 99-104. ISSN 0255-5476

Gubicza, Jenő and Juhász, András (1997) Mechanikai tulajdonságok meghatározása a mélységérzékeny Vickers-keménységmérés módszerével. Bányászati és Kohászati Lapok - Kohászat, 130. pp. 315-318. ISSN 0005-5670

Gubicza, Jenő and Lábár, János and Agócs, Emil and Fátay, D. and Lendvai, János (2008) Effect of nano-quasicrystals on viscosity of a Zr-based bulk metallic glass. Scripta Materialia, 58 (4). pp. 291-294. ISSN 1359-6462

Gubicza, Jenő and Lábár, János and Quynh, Luu Manh and Namc, Nguyen Hoang and Luong, Nguyen Hoang (2013) Evolution of size and shape of gold nanoparticles during long-time aging. MATERIALS CHEMISTRY AND PHYSICS, 138 (2-3). pp. 449-453. ISSN 0254-0584

Gubicza, Jenő and Ribárik, Gábor and Bakonyi, Imre and Ungár, Tamás (2001) Microstructure of a rapidly quenched nanocrystalline Hf11Ni89 alloy from X-ray diffraction. In: EUROMAT-2001 Conference, 2001, Rimini, Italy.

Gubicza, Jenő and Ribárik, Gábor and Szépvölgyi, János and Mohai, Ilona and Ungár, Tamás (2001) Crystallite size distribution and dislocation density in nanocrystalline silicon nitride powders produced by two different procedures. Materials World, 2 (2). pp. 1-8. ISSN 0967-8638

Gubicza, Jenő and Schiller, I. and Chinh, Nguyen Quang and Illy, J. and Horita, Z. and Langdon, T. G. (2007) The effect of severe plastic deformation on precipitation in supersaturated Al–Zn–Mg alloys. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCURE AND PROCESSING, 460-46. pp. 77-85. ISSN 0921-5093

H

Hajnal, Zoltán and Deák, P. and Köhler, Th. and Kaschner, R. and Frauenheim, Th. (1998) Theoretical study of the luminescent substoichiometric silicon oxides (SiOx). Solid State Communications, 108 (2). pp. 93-97. ISSN 0038-1098

Hajnal, Zoltán and Deák, Péter (1998) Surface recombination model of visible luminescence in porous silicon. Journal of Non-Crystalline Solids, 227-30. pp. 1053-1057. ISSN 0022-3093

Hajnal, Zoltán and Miró, József and Kiss, Gábor and Réti, Ferenc and Deák, Péter and Herndon, Roy C. and Kuperberg, J. Michael (1999) Role of oxygen vacancy defect states in the n-type conduction of β-Ga[sub 2]O[sub 3]. Journal of Applied Physics, 86 (7). pp. 3792-3796. ISSN 0021-8979 (print), 1089-7550 (online)

Hajnal, Zoltán and Vogg, Günther and Meyer, Lex and Szűcs, Bernadett and Brandt, Martin and Frauenheim, Thomas (2001) Band structure and optical properties of germanium sheet polymers. Physical Review B, 64 (3). No. 033311. ISSN 0163-1829

Halmai, Attila and Csizmadia, József and Halas, János and Huba, Antal and Meszlényi, György and Molnár, László and Szabó, Tibor and Takács, Áron (2007) Új típusú intelligens aktuátorok kutatása = Research of new type intelligent actuators. Project Report. OTKA.

Harmati, I. and Lantos, Béla and Payandeh, S. (2005) Fitted stratified manipulation with decomposed path planning on submanifolds. International Journal of Robotics and Automation, 20 (3). pp. 135-144. ISSN 0826-8185 (print), 1925-7090 (online)

Hegedűs, Zoltán and Gubicza, Jenő and Kawasaki, M. and Chinh, Nguyen Quang and Lábár, János and Langdon, T.G. (2013) Stability of the ultrafine-grained microstructure in silver processed by ECAP and HPT. Journal of Materials Science, 48. pp. 4637-4645. ISSN 0022-2461

Hermann, Gyula and Füzessy, Zoltán and Sántha, Csongor and Tálas, Mátyás (2009) A szubmikron méréstechnika egyes érzékelési feladatainak elméleti és kísérleti vizsgálata = Theoretical and experimental investigation of certain sensory tasks in the submicron measuring technique. Project Report. OTKA.

Horváth, Győző and Chinh, Nguyen Quang and Gubicza, Jenő and Lendvai, János (2007) Plastic instabilities and dislocation densities during plastic deformation in Al–Mg alloys. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCURE AND PROCESSING, 445-44. pp. 186-192. ISSN 0921-5093

Házi, Gábor and Imre, Attila and Mayer, Gusztáv and Farkas, István (2002) Lattice Boltzmann methods for two-phase flow modeling. Annals of Nuclear Energy, 29 (12). pp. 1421-1453. ISSN 0306-4549

Házi, Gábor and Mayer, Gusztáv and Farkas, István and Makovi, Péter and El-Kafas, A. A. (2001) Simulation of a small loss of coolant accident by using RETINA V1.0D code. Annals of Nuclear Energy, 28 (16). pp. 1583-1594. ISSN 0306-4549

Házi, Gábor and Pór, Gábor (1999) Numerical simulator for noise diagnostic investigations in NPPs. Annals of Nuclear Energy, 26 (12). pp. 1113-1130. ISSN 0306-4549

Házi, Gábor and Pór, Gábor (1999) On bias of transfer function of numerical ordinary differential equation solvers in the frequency domain. Annals of Nuclear Energy, 26 (13). pp. 1221-1226. ISSN 0306-4549

J

Jackson, Koblar and Pederson, Mark R. and Porezag, Dirk and Hajnal, Zoltán and Frauenheim, Thomas (1997) Density-functional-based predictions of Raman and IR spectra for small Si clusters. Physical Review B (Condensed Matter), 55 (4). pp. 2549-2555. ISSN 0163-1829

Jenei, Péter and Yoon, E.Y. and Gubicza, Jenő and Kim, H.S. and Lábár, János and Ungár, Tamás (2013) Microstructure and thermal stability of copper - carbon nanotube composites consolidated by High Pressure Torsion. Materials Science Forum, 729. pp. 228-233. ISSN 0255-5476

K

Kereszturi, Klára and Tóth, András and Mohai, Miklós and Bertóti, Imre and Szépvölgyi, János (2010) Nitrogen plasma-based ion implantation of poly(tetrafluoroethylene): effect of the main parameters on the surface properties. Applied Surface Science, 256. pp. 6385-6389. ISSN 0169-4332

Kiss, Péter and Füleky, György and Laib, Lajos and Szakács, Tamás and Szente, Márk and Vas, Attila (2009) A gumiabroncs-talaj kapcsolatában lejátszodó dinamikus energiatranszport folyamatok vizsgálata = Investigation of the dynamic energy transport process in the soil tyre interaction. Project Report. OTKA.

Kiss, Ákos and Lábár, János (2013) A method for complete characterization of the macroscopic geometry of grain boundaries. Materials Science Forum, 729. pp. 97-102. ISSN 0255-5476

Knaup, J. and Deák, P. and Frauenheim, Th. and Gali, Ádám and Hajnal, Zoltán and Choyke, W. (2005) Defects in SiO2 as the possible origin of near interface traps in the SiC∕SiO2 system: A systematic theoretical study. Physical Review B (Condensed Matter and Materials Physics), 72 (11). No. 115323. ISSN 1098-0121

Knaup, J. M. and Deák, Peter and Gali, Ádám and Hajnal, Zoltán and Frauenheim, Thomas and Choyke, W. J. (2005) The Search for Near Interface Oxide Traps - First-Principles Calculations on Intrinsic SiO2 Defects. Materials Science Forum, 483-85. pp. 569-572. ISSN 0255-5476

Knaup, Jan and Deák, Peter and Frauenheim, Thomas and Gali, Ádám and Hajnal, Zoltán and Choyke, W. (2005) Theoretical study of the mechanism of dry oxidation of 4H-SiC. Physical Review B (Condensed Matter and Materials Physics), 71 (23). No. 235321. ISSN 1098-0121

Knickelbein, Mark B. and Koretsky, Geoffrey M. and Jackson, Koblar A. and Pederson, Mark R. and Hajnal, Zoltán (1998) Hydrogenated and deuterated iron clusters: Infrared spectra and density functional calculations. The Journal of Chemical Physics, 109 (24). pp. 10692-10700. ISSN 0021-9606

Kohary, K. and Kugler, S. and Hajnal, Zoltán and Köhler, T. and Frauenheim, T. and Kátai, S. and Deák, P. (2002) Atomistic simulation of the bombardment process during the BEN phase of chemical vapor deposition (CVD) of diamond. Diamond and Related Materials, 11 (3-6). pp. 513-518. ISSN 0925-9635

Koncz, Péter and Horváth, Ákos and Balázsi, Katalin and Sahin, Filiz Cinar and Göller, Gültekin and Onüralp, Yücel and Balázsi, Csaba (2013) Correlation between milling parameters, structural and mechanical properties of nanostructured austenitic Y2O3 strengthened steels. Materials Science Forum, 729. pp. 409-414. ISSN 0255-5476

Kristóf, Gergely and Unger, János (2009) A hőszigetek kialakulásának és befolyásolásának modellezése a numerikus áramlástan alkalmazásával = Modelling of development and methods of control of heat islands by using computational fluid dynamics. Project Report. OTKA.

Kullmann, László and Hős, Csaba and Paál, György and Pandula, Zoltán and Vaik, István (2010) Rétegkavitáció geometriájának meghatározása kísérleti és numerikus módszerekkel = Experimental and numerical determination of attached cavity region. Project Report. OTKA.

Kun, Péter and Tapasztó, Orsolya and Czigány, Zsolt and Balázsi, Csaba (2013) Preparation and characterization of multilayer graphene by mechanical milling and related applications for ceramic composites. Materials Science Forum, 729. pp. 252-259. ISSN 0255-5476

Kurutzné Kovács, Márta and Tornyos, A. (2004) Experimentally based numerical models and numerical simulation with parameter identification of human lumbar FSUs in traction. In: Proceedings of the 6th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering. FIRST Numerics Ltd., Madrid, pp. 1-6. ISBN 0-9549670-0-3

Kárpáti, Tamás and Kulinyi, S. and Végvári, P. and Ferencz, J. and Nagy, A. and Csikósné Pap, Andrea Edit and Battistig, Gábor (2013) Packaging of a 3-axial piezoresistive sensor with backside contacts. MICROSYSTEM TECHNOLOGIES. ISSN 0946-7076

Köhler, Christof and Hajnal, Zoltán and Deák, Péter and Frauenheim, Thomas and Suhai, Sándor (2001) Theoretical investigation of carbon defects and diffusion in α-quartz. Physical Review B (Condensed Matter), 64 (8). No. 085333. ISSN 0163-1829

Köhler, Th. and Frauenheim, Th. and Hajnal, Zoltán and Seifert, G. (2004) Tubular structures of GaS. Physical Review B (Condensed Matter and Materials Physics), 69 (19). No. 193403. ISSN 1098-0121

L

Lajos, Tamás and Dezső, Gábor and Goricsán, István and Paulik, Ferenc and Régert, Tamás and Suda, Jenő Miklós (2007) Közúti járművek által kibocsátott szennyezőanyagok épített és természetes környezetben történő terjedésének elméleti és kísérleti vizsgálata = Theoretical and experimental investigation on dispersion of pollutants emitted by ground vehicles in urban and natural environment. Project Report. OTKA.

Lantos, Béla (2006) Matlab programfejlesztés autópálya hálózat irányítására. Algoritmus, szoftver és dokumentáció. Project Report. -. (Unpublished)

Lantos, Béla (2006) Path design and receding horizon control for collision avoidance system of cars. WSEAS Transactions on Systems and Controls, 1 (2). pp. 105-112. ISSN 1991-8763

Lingner, Th. and Greulich-Weber, S. and Spaeth, J. M. and Gerstmann, U. and Rauls, E. and Hajnal, Zoltán and Frauenheim, Th. and Overhof, H. (2001) Structure of the silicon vacancy in 6H-SiC after annealing identified as the carbon vacancy–carbon antisite pair. Physical Review B (Condensed Matter and Materials Physics), 64 (24). No. 245212. ISSN 1098-0121

Lukács, János and Czél, Gergely and Czigány, Tibor and Égert, János and Gaál, János and Nagy, Gyula and Török, Imre (2010) Fém-polimer hibrid csövek élettartam gazdálkodása = Life-time mangement of metal-polymer hybrid pipes. Project Report. OTKA.

Lőrincz, Emőke and Földvári, István and Koppa, Pál and Richter, Péter (2007) Anyagok és rendszerek nagysűrűségű optikai adattároláshoz = Materials and systems for high density optical data storage. Project Report. OTKA.

M

M. Csizmadia, Béla and Égert, János and Fenyvesi, László and Judák, Endre and Pere, Balázs (2009) Textilkompozitok mezőgazdasági alkalmazásának mechanikai megalapozása = Substantiation of adaptation of composites in agriculture. Project Report. OTKA.

Magasdi, A. and Dobránszky, János and Tusz, F. and Ginsztler, János (2007) Fatigue Properties of Welded Joints of High-Carbon Steels. Materials Science Forum (537-38). pp. 47-53. ISSN 0255-5476

Mohai, Ilona and Gál, Lóránd and Szépvölgyi, János and Gubicza, Jenő and Farkas, Zsuzsa (2007) Synthesis of nanosized zinc ferrites from liquid precursors in RF thermal plasma reactor. Journal of the European Ceramic Society, 27 (2-3). pp. 941-945. ISSN 0955-2219

Morgiel, J. and Grzonka, J. and Mania, R. and Zimowski, S.ł. and Lábár, János and Fogarassy, Zsolt (2013) Relation between microstructure and hardness of nano-composite CrN/Si 3N4 coatings obtained using CrSi single target magnetron system. Vacuum, 90. pp. 170-175. ISSN 0042-207X

Márton, Lőrinc and Lantos, Béla (2006) Identification and model-based compensation of Striebeck friction. Acta Polytechnica Hungarica, 3 (3). pp. 45-58. ISSN 1785-8860

Márton, Lőrinc and Lantos, Béla (2007) Modeling, Identification, and Compensation of Stick-Slip Friction. IEEE Transactions on Industrial Electronics, 54 (1). pp. 511-521. ISSN 0278-0046

Márton, Lőrinc and Lantos, Béla (2004) Sliding mode robot control with friction and payload estimation. Journal of Advanced Computational Intelligence and Intelligent Informatics, 8 (5). pp. 553-561. ISSN 1343-0130

Mészáros, I. and Ginsztler, János (2007) Magnetic investigation of thermal shock fatigue process. Key Engineering Materials, 345-46. pp. 1283-1286. ISSN 1013-9826

Mészáros, Imre and Nyirő, József and Szalay, Tibor and Takács, Márton and Verő, Balázs (2009) Nanoszerkezetű anyagok forgácsolási tulajdonságainak és felület integritásának vizsgálata = Analysis of Surface Integrity and Cutting Properties of Nano Structural Materials. Project Report. OTKA.

O

Orbulov, Imre Norbert and Ginsztler, János (2012) Compressive behaviour of metal matrix syntactic foams. Acta Polytechnica Hungarica, 9 (2). pp. 43-56. ISSN 1785-8860 (In Press)

Orbulov, Imre Norbert and Ginsztler, János (2012) Compressive characteristics of metal matrix syntactic foams. Composites Part A, 43 (4). pp. 553-561. ISSN 1359-835X

Orbulov, Imre Norbert and Májlinger, Kornél (2012) Microstructure of metal matrix composites reinforced by ceramic microballoons. Materiali in Technologije / Materials and Technology. ISSN 1580-2949 (In Press)

P

Pederson, Mark and Jackson, Koblar and Porezag, D. and Hajnal, Zoltán and Frauenheim, Th. (1996) Vibrational signatures for low-energy intermediate-sized Si clusters. Physical Review B (Condensed Matter and Materials Physics), 54 (4). pp. 2863-2867. ISSN 1098-0121

Pokorádi, László (2008) Rendszerek és folyamatok modellezése. Campus Kiadó, Debrecen. ISBN 978-963-9822-06-1

R

Rauls, E. and Hajnal, Zoltán and Deák, P. and Frauenheim, Th. (2001) Theoretical study of the nonpolar surfaces and their oxygen passivation in 4H- and 6H-SiC. Physical Review B (Condensed Matter and Materials Physics), 64 (24). No. 245323. ISSN 1098-0121

Rauls, E. and Hajnal, Zoltán and Deák, Peter and Frauenheim, Thomas (2000) (1010)– and (1120)–Surfaces in 2H–, 4H– and 6H–SiC. Materials Science Forum, 338-42. pp. 365-368. ISSN 1662-9752

Rauls, E. and Hajnal, Zoltán and Gali, Ádám and Deák, Peter and Frauenheim, Thomas (2001) Intrinsic Defect Complexes in α-SiC: the Formation of Antisite Pairs. Materials Science Forum, 353-56. pp. 435-438. ISSN 1662-9752

Rauls, E. and Staab, T. E. M. and Hajnal, Zoltán and Frauenheim, Th. (2001) Interstitial-based vacancy annealing in 4H–SiC. Physica B: Condensed Matter, 308-10. pp. 645-648. ISSN 0921-4526

Ring, György and Bognár, Eszter and Dobránszky, János and Ginsztler, János and Major, László (2006) Mechanical Behaviours of Coronary Stents. Advances in Science and Technology, 49. pp. 91-96. ISSN 1662-0356

S

Seifert, Gotthard and Köhler, Thomas and Hajnal, Zoltán and Frauenheim, Thomas (2001) Tubular structures of germanium. Solid State Communications, 119 (12). pp. 653-657. ISSN 0038-1098

Simdyankin, S. and Elliott, S. and Hajnal, Zoltán and Niehaus, T. and Frauenheim, Th. (2004) Simulation of physical properties of the chalcogenide glass As2S3 using a density-functional-based tight-binding method. Physical Review B (Condensed Matter and Materials Physics), 69 (14). No. 144202. ISSN 1098-0121

Soumelidis, Alexandros and Gáspár, Péter and Bauer, Péter and Lantos, Béla and Prohászka, Zoltán (2007) Design of an embedded microcomputer based mini quadrotor UAV. In: European Control Conference. IEEE, Kos, pp. 2236-2241. ISBN 978-960-89028-5-5

Sulyok, Attila and Tóth, Attila Lajos and Zommer, L. and Menyhárd, Miklós (2013) Simulation of the backscattered electron intensity of multilayer structure for the explanation of secondary electron contrast. Ultramicroscopy, 124. pp. 88-95. ISSN 0304-3991

Szalai, József (2007) Építési faanyagok technikai szilárdságainak kísérleti meghatározása. Project Report. OTKA.

Szilágyi, Edit and Hajnal, Zoltán and Pászti, Ferenc and Buiu, O. and Craciun, G. and Cobianu, C. and Savaniu, C. and Vázsonyi, Éva (1997) Investigation of the Morphology of Porous Silicon by Rutherford Backscattering Spectrometry. Materials Science Forum, 248-24. pp. 373-376. ISSN 1662-9752

Szűcs, B. and Hajnal, Zoltán and Frauenheim, Th. and Gonzalez, C. and Ortega, J. and Perez, R. and Flores, F. (2003) Chalcogen passivation of GaAs(1 0 0) surfaces: theoretical study. Applied Surface Science, 212-13. pp. 861-865. ISSN 0169-4332

Szűcs, B. and Hajnal, Zoltán and Scholz, R. and Sanna, S. and Frauenheim, Th. (2004) Theoretical study of the adsorption of a PTCDA monolayer on S-passivated GaAs(l00). Applied Surface Science, 234 (1-4). pp. 173-177. ISSN 0169-4332

Szűcs, Bernadett and Gali, Ádám and Hajnal, Zoltán and Deák, Peter and Van de Walle, Chris (2003) Physics and chemistry of hydrogen in the vacancies of semiconductors. Physical Review B (Condensed Matter and Materials Physics), 68 (8). No. 085202. ISSN 1098-0121

Sáry, Gyula and Vogels, R. and Orban, G. (1993) Cue-invariant shape selectivity of macaque inferior temporal neurons. Science, 260 (5110). pp. 995-997. ISSN 0036-8075

T

Takács, János and Csanády, Andrásné and Gácsi, Zoltán and Herczeg, Szabolcs and Markovits, Tamás and Ozsváth, Péter (2009) Lézerrel színterelt vagy olvasztott gyorsprototípusok tulajdonságfejlesztése = Development of properties of laser sintered or melted rapid prototypes. Project Report. OTKA.

Tisza, Miklós and Balogh, Gábor and Dobi, Balázs and Kaulics, Nikoletta and Kovács, Péter Zoltán and Lukács, Zsolt and Polák, Helga and Rowshan, Reza (2009) Végeselemes modellezés az anyagtudományban és az anyagtechnológiákban = Finite Element Modelling in Materials Science and Materials Processing Technologies. Project Report. OTKA.

Tóth, András and Kereszturi, Klára and Mohai, Miklós and Bertóti, Imre (2010) Plasma based ion implantation of engineering polymers. Surface and Coatings Technology (204). pp. 2898-2908. ISSN ISSN: 0257-8972

Tóth, András and Veres, Miklós and Kereszturi, Klára and Mohai, Miklós and Bertóti, Imre and Szépvölgyi, János (2011) Formation of amorphous carbon on the surface of poly(ethylene terephthalate) by helium plasma based ion implantation. Nuclear Instruments and Methods in Physics Research B (269). pp. 1855-1858. ISSN 0168-583X

V

Varga, Ádám and Lantos, Béla (2005) Model based predictive control of underactuated nonlinear mechatronical systems. Periodica Polytechnica Electrical Engineering, 49 (1-2). pp. 123-140. ISSN 0324-6000

Vas, László Mihály and Czvikovszky, Tibor and Gaál, János and Halász, Marianna and Nagy, Péter and Nagy, Veronika and Simon, Zoltán László and Tamás, Péter (2009) Szálas szerkezetek és szálerősítésű kompozitok statisztikus szerkezeti-szilárdsági modellezése és komplex vizsgálata = Statistical modelling and testing the structure and strength of fibrous structures and fibre reinforced composites using complex methods. Project Report. OTKA.

Vass, Gábor and Lantos, Béla and Payandeh, S. (2006) Object Reconfiguration with Dextrous Robot Agents. Journal of Advanced Computational Intelligence and Intelligent Informatics, 10 (2). pp. 234-240. ISSN 1343-0130 (print), 1883-8014 (online)

Vásárhelyi, Balázs (2007) Műemléki kőanyagok kőzetmechanikai vizsgálata = Rock mechanics investigation of monument stones. Project Report. OTKA.

Vértesy, Gábor and Kádár, György and Daróczi, Csaba Sándor and Sebestyén, Imre and Pávó, József and Gasparics, Antal and Gyimóthy, Szabolcs and Veszely, Gyula (2007) Szerkezeti anyagok degradációjának kimutatása elektromágneses elven alapuló roncsolásmentes módszerekkel = Detection of structural materials' degradation by electromagnetic nondestructive methods. Project Report. OTKA.